T032 48v battery Owners manual

Download PDF Manual:

T032 48v battery Owners manual

Full Text of Manual:

I CONTACT US
+86-0755-36852966
k @ www.unitpackpower.com
sales@unitpackpower.com
UNIT PACK POWER
Li ion Battery Manufacturer
T032
OPERATING
MANUAL
Function introduction
► Charge socket
Charge socket use for charger. Charge
current can not be more than 5 amps
for this socket.
► Safe lock
Lock,use to lock the battery on
the frame
Discharge socket
Discharge cable connect to ebike
controller power cable
Red for positive +
Black for negative –
Battery handle
180 degree rotating portable battery
handle. This handle is for carrying
batteries.
► Battery install plate
Battery install plate. This plate will be
installed on the battery when we ship.
You can take it off by the key and install
it on the ebike frame by screw.Then put
the battery on it. We do not provide the
screw because we are not sure which
screw size if fit your frame.
A A
Red light:
Charging
Green light:
Full Charged
► Charger
Charger,plug into electric green
light,then plug into battery red
light,after full charged change to
green.Then finished charge and
unplug the charger.
| Installation method
14.9″
length:365mm
width:! 50mm
height75mm
6.1″
i
6“
Mount Plate
Install, take off the mounting
plate from the battery, and
use screw install the plate on
the ebike, then make the
battery slip into the plate
Rear hanger and lock it.

One thought on “T032 48v battery Owners manual”

Leave a Reply to Jack Mead Cancel reply