{"id":237,"date":"2019-01-14T19:02:47","date_gmt":"2019-01-14T19:02:47","guid":{"rendered":"http:\/\/www.twistidea.com\/manual\/?p=237"},"modified":"2019-01-14T19:02:47","modified_gmt":"2019-01-14T19:02:47","slug":"sorbus-kids-hammock-pod-swing-chair","status":"publish","type":"post","link":"https:\/\/www.twistidea.com\/manual\/sorbus-kids-hammock-pod-swing-chair\/","title":{"rendered":"SORBUS KIDS HAMMOCK POD SWING CHAIR"},"content":{"rendered":"

Download PDF Manual:<\/strong><\/p>\n

SORBUS KIDS HAMMOCK POD SWING CHAIR.pdf<\/a> \"\"<\/p>\n

Full Text of Manual:<\/strong><\/p>\n

o
\nSORBUS KIDS HAMMOCK
\nPOD SWING CHAIR
\nAssembly Instructions
\nFigure 1 Figure 2
\nStep 1: Create Anchor Points
\nLocate the beam onto which you want to mount the bolts for the Hammock Pod Swing.
\n(Note: You can use a stud finder to locate the best spot). Using a \u00a52 (12.7mm) drill bit,
\ndrill 2 holes about 2 % -inches deep. You can mark the bit with a piece of tape or a
\nmarker for the exact measurement. Make sure the hole does not go too deep or the bolt
\nexpansion anchor will not hold properly.
\nThank you for choosing the Sorbus\u00ae Kids Hammock
\nPod Swing. Please reference assembly instructions
\nbefore use. Make sure all parts are present and place
\nthem side by side for easy identification.
\nTools required:
\n\u2022 Drill
\n\u2022 Y2 (12.7mm) drill bit
\n\u2022 Wrench
\nPackage Contents:
\na \\\\\\\\ 4
\nB w \u00bb 2
\nP n\u2019 \/ Washers
\n^ \u25a0’ A ‘Q’Tp and Nuts
\n4
\nEach
\nD Oil\u00a9 Oil\u00a9 2
\nE 03 O SHo\u00abP 2
\nInflatable
\n——-Oy Cushion
\n1
\n\\ i Kids
\n|V\/| Hammock
\nl\\ j[ \/ Pod Swing
\nV\u2014L7 Chair
\n1
\nWarnings:
\nFigure 3 Figure 4
\nStep 2: Attach Bolts and Hooks
\nAfter drilling the hole in the ceiling, put the bolts in the hole. Then, put the mounting
\nbrackets into the bolts. Apply the washer and nuts (Figure 3). Use a wrench to Ensure
\nall bolts are tightened until firmly secure.
\nFigure 5
\nStep 3: Attach Hammock Pod
\nOnce the bolts and mounting bracket are in place, attach the nylon rope. Secure
\nthe nylon rope with a tight knot and connect it to the swoop hook which then
\nconnects to the hammock pod swing.
\nChildren must be accompanied by an adult at all times.
\nAvoid wearing any shoes or clothing with sharp or
\nprotruding objects that may damage or tangle with the
\nhammock. It is not necessary to apply any excessive
\nforce to achieve any of the above steps. Excessive force
\nwill result in damage to the frame or the hammock, and
\nis not covered by warranty. Install at your own risk. The
\nhammock owner is solely responsible for the
\nattachment point installation security and safety. The
\nmanufacturers are not responsible for any injuries due
\nto the use of this product.
\nCheck for Safety
\nAfter installing, tug firmly on the rope to be sure it holds. Then, place a heavy object in the hammock
\nchair to be sure it remains secure. As a final test, sit in the hammock pod with feet planted firmly on
\nthe ground to ensure that it can hold the weight of a person. If the hammock pod holds steady, then
\nsit back and relax! Prior to each use of your hammock, inspect the ropes, mounting hardware, and
\ninstallation points for signs of wear or weakness.<\/p>\n","protected":false},"excerpt":{"rendered":"

Download PDF Manual: SORBUS KIDS HAMMOCK POD SWING CHAIR.pdf Full Text of Manual: o SORBUS KIDS HAMMOCK POD SWING CHAIR Assembly Instructions Figure 1 Figure 2 Step 1: Create Anchor Points Locate the beam onto which you want to mount the bolts for the Hammock Pod Swing. (Note: You can use a stud finder to … Continue reading “SORBUS KIDS HAMMOCK POD SWING CHAIR”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[],"class_list":["post-237","post","type-post","status-publish","format-standard","hentry","category-user-manual"],"_links":{"self":[{"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/posts\/237","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/comments?post=237"}],"version-history":[{"count":1,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/posts\/237\/revisions"}],"predecessor-version":[{"id":240,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/posts\/237\/revisions\/240"}],"wp:attachment":[{"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/media?parent=237"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/categories?post=237"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.twistidea.com\/manual\/wp-json\/wp\/v2\/tags?post=237"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}