Full Text Searchable PDF User Manual
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
Standalone Keypad Access Control
AG-S600EM-W User Manual
Please, read the manual carefully before using this unit!
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
3. Description
The unit is single door multifunction standalone access controller or a Wiegand output
keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh
environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated
case which is available in either a bright silver or matt silver finish. The electronics are
fully potted so the unit is waterproof and conforms to IP68. This unit supports up to 2000
users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports
125KHZ EM cards,13.56MHz Mifare cards. The unit has many extra features including lock
output current short circuit protection, Wiegand output , and a backlit keypad. These features
make the unit an ideal choice for door access not only for small shops and domestic households
but also for commercial and industrial applications such as factories, warehouses, laboratories,
banks and prisons.
4. Features
Waterproof, conforms to IP68
Strong Zinc Alloy Electroplated anti-vandal case
Full programming from the keypad
2000 uses, supports Card, PIN, Card + PIN
Can be used as a stand-alone keypad
Backlight keys
Wiegand 26 input for connection to external reader
Wiegand 26 output for connection to a controller
Adjustable Door Output time, Alarm time, Door Open time
Very low power consumption (30mA)
Fast operating speed, <20ms with 2000 users
Lock output current short circuit protection
Easy to install and program
Built in light dependent resistor (LDR) for anti-tamper
Built in buzzer
Red, Yellow and Green LEDS display the working status
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
5. Specifications
6. Installation
Remove the back cover from the keypad using the supplied special screw driver
Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
Put the supplied rubber bungs to into the two holes
Fix the back cover firmly on the wall with 2 Self tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover.
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
7. Wiring
Common power supply diagram:
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
Special Power supply diagram:
8. To Reset to Factory Default
Disconnect power from the unit
Press and hold # key whilst powering the unit back up
On hearing two “Di” release # key, system is now back factory settings
Please, note that only installer data is restored, user data will not be affected!
10. Sound and Light indication
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
11. Detailed Programming Guide
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
11.2 Door Settings
AccessGard, Inc. 13230 SW 132
nd
Ave, Ste 3, Miami, Fl 33186
Tel: (305) 252-3333 Email : sales@accessgard.com
12. The unit operating as a Wiegand Output Reader