Full Text Searchable PDF User Manual
![background image](/manualsandmore/images/temp/1054/1054001.png)
Table of Contents
Safety
……………………………………………………………… 1
Electrical
safety
………………………………………………………………
1
Installation
safety ………………………………………………………………
1
Cleaning
safety
………………………………………………………………
1
Special notes on LCD
monitors
……………………………………………………………… 2
Package contents
……………………………………………………………… 2
Installation
instructions
……………………………………………………………… 3
Placement
………………………………………………………………
3
Installation
………………………………………………………………
3
External
controls
………………………………………………………………
4
Image
adjustment
………………………………………………………………
5
Screen
adjustment
………………………………………………………………
7
Attachments
……………………………………………………………… 8
Plug and play
………………………………………………………………
8
Power
saver
………………………………………………………………
8
Troubleshooting
………………………………………………………………
8
Technical
specifications
……………………………………………………………… 9
Display
modes
………………………………………………………………
10
![background image](/manualsandmore/images/temp/1054/1054002.png)
Safety
Electrical
safety
Note:
To ensure your safety and prolong the life of the product, read
the following safety recommendations carefully before using the product
for the first time.
y
Do not touch the inside of the monitor. Only authorized and qualified
technicians should open the LCD monitor case.
y
Hold the plug (not the power cable) when you connect the plug to
the socket. Make sure your hands are dry.
y
This product should only be operated with the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
y
This product is equipped with a 3-prong plug, (a plug having a third
grounding pin). This plug will only fit into a grounded power outlet.
If you are unable to insert the grounded plug into the outlet, contact
your electrician to replace your obsolete outlet. Do not use a
two-prong adapter instead of the grounded plug.
y
Don’t expose your LCD monitor to water, or any environment with
a high temperature or humidity, such as kitchens or swimming pools.
Flower vases filled with water are also dangerous.
y
If your LCD monitor operates abnormally (i.e., releases smoke, noise
or a smell), remove the plug immediately and contact your authorized
dealer or service center.
Installation
safety
y
Don't touch your LCD monitor with your fingers or any hard object.
Avoid scratching or leaving any oil sludge on the surface of the
display.
y
Protect your LCD monitor by installing it in a place that is
well-ventilated, moisture proof, and dust-free.
y
Don’t install your LCD monitor near a heat source, (i.e., ovens,
space heaters, fire places, furnaces or in the sun).
y
To avoid electric shock, or dropping, install your LCD monitor in
a place where children will not touch it. Secure your LCD monitor
firmly and explain the safety rules to children, if required.
y
When installing your LCD monitor or adjusting its angle, attention
should be paid to the loading capability and leveling of the
structure supporting the LCD monitor.
Cleaning safety
y
Don’t spray cleanser or water onto your LCD monitor or its case.
y
When cleaning your LCD monitor, make sure that no liquid permeates
into the inside of the LCD monitor or any accessory.
y
Moisten a clean, soft, lint-free cloth with water or glass cleaner
without alcohol. Squeeze it so it's just a little damp and wipe
the surface of your LCD monitor gently. It is recommended to use
a silk cloth that is exclusively used to clean the display.
1
![background image](/manualsandmore/images/temp/1054/1054003.png)
Special notes on LCD monitors
The following symptoms are normal for LCD monitors and do not indicate a problem with
the device:
y
Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the power switch and then turn it on again to make the flicker disappear.
y
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
y
The LCD screen has effective pixels of 99.99% or more. It may include blemishes
of 0.01% or less (caused by a missing pixel or a pixel that is always lit).
y
When the same image is displayed for hours on end, its afterimage may remain after
switching to a new image. When this happens, the screen will recover slowly by changing
the image. Turning the LCD monitor off for several hours will also correct this
problem.
Package contents
LCD display
(with speakers)
D-Sub signal cable
DVI signal cable
(optional)
Quick Start Guide
Power cable
User's Guide (CD)
2
![background image](/manualsandmore/images/temp/1054/1054004.png)
Installation instructions
Placement
Note:
Read the Safety section carefully before starting the installation.
When installing your LCD monitor, consider the placement of the monitor:
y
To minimize the reflection of the monitor, protect your eyes, and ensure
premium quality, don’t install your LCD monitor near windows or where
there is backlight. Keep the monitor at least 30 cm away from your eyes.
y
The upper edge of the monitor should be just a little higher than your
line of sight.
y
Adjust the front and back dip angles of the monitor, so that you can
view the display comfortably.
Connecting the base to the monitor
Take the base out of the box and place it on a
flat table.
y
Position the monitor on top of the base.
y
Connect the base into the neck of the monitor
along the track.
y
You will hear a click sound when the base
and the monitor are properly connected.
Installati
on
Connecting the LCD monitor to a PC
y
Make sure that the power supply of your PC
is turned off and the power plug is removed.
y
Connect and fasten both ends of the signal
cable to your PC host and LCD monitor,
respectively.
y
Connect the attached power cable to your LCD
monitor.
y
Plug the power cable into the receptacle.
y
Use the cable tie to bind up the power cord
and the D-sub signal cable / DVI-D cable.
y
Turn on the power supplies of your PC and
LCD monitor.
X
Power cable
Y
DVI signal cable
(optional)
Z
D-Sub signal cable
3
![background image](/manualsandmore/images/temp/1054/1054005.png)
External
controls
1
Power source
Power On/Off
Green indication: Power is on and normal.
Orange indication: Sleep status in the energy-saving
mode.
Colorless indication: Power off.
2 Menu
OSD
Menu
Press this button to enter OSD. Press it again to exi
OSD.
3 >
Plus
Press this button for selection or adjustment when
OSD is started.
4 <
Minus
Press this button and click < and > to adjust volume
when OSD is not started (for the model with speakers
only).
5 Auto
Automatic
adjustment
Press this button to exit the manual when OSD is
started.
Press this button for the display to optimize the
position, phase and clock pulse automatically when
OSD is not started.
4
![background image](/manualsandmore/images/temp/1054/1054006.png)
Image
adjustment
for analog
The image settings of your LCD monitor were adjusted to their optimal status
for analog TV before shipment. (See Page 9). If you want to adjust the image
settings to suit your personal preference, follow the steps below:
1.
Click Menu to display the OSD window as shown in the following figure.
2.
Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
3.
Click the Menu again to select the function to be adjusted.
4.
Click Plus or Minus to change current settings.
5.
To exit the OSD window, select "
" to close and save changes. To change
other settings, repeat steps 2-4.
(Analog)
Bright/Contract
Phase/Clock pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Auto
Message
Restore
Exi
5
![background image](/manualsandmore/images/temp/1054/1054007.png)
Image
adjustment
for
digital
The image settings of your LCD monitor were adjusted to their optimal status
for digital TV before shipment. (See Page 9). If you want to adjust the image
settings to suit your personal preference, follow the steps below:
1.
Click Menu to display the OSD window as shown in the following figure.
2.
Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
3.
Click the Menu again to select the function to be adjusted.
4.
Click Plus or Minus to change current settings.
5.
To exit the OSD window, select “
” to close and save changes. To change
other settings, repeat steps 2-4.
(Digital)
Bright/Contrast
Phase/Clock Pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Input Selectio
Message
Restore
Exit
6
![background image](/manualsandmore/images/temp/1054/1054008.png)
7
Function Definition
Screen
adjustment
Primary
directory
symbol
Secondary
directory
Secondary
directory items
Description
symbol
Contrast
Adjusts the contrast between the foreground
and background of an image on the screen.
Brightness
Adjusts the background brightness of the
screen.
Phase
Adjusts the focus of the image
(for analog input adjustment only).
Clock pulse
Adjusts the clock pulse of the image
(for analog input adjustments only).
Horizontal
Moves the image left and right on the screen
(for analog input adjustments only).
Vertical
Moves the image up and down on the screen
(for analog input adjustments only).
N/A
Warm color
temperature
Sets the color temperature to warm white.
N/A
Cold color
temperature
Sets the color temp to cold white.
User
Definition/Red
User
Definition/Gree
n
User
Definition/Blue
Adjusts red/green/blue gain.
N/A
English
N/A
N/A
Deutsch
N/A
Français
N/A
Español
N/A
Italiano
N/A
N/A
N/A
Hollands
N/A
Suomalainen
Русский
Used to select the language you want.
N/A
Horizontal
Moves OSD left and right.
Vertical
Moves OSD up and down.
OSD time display Adjusts OSD time display settings.
N/A Auto
adjustment
Sets up horizontal, vertical, sequence and
focus automatically (for analog input only).
N/A Analog
digital
Used to select the input source you want (for
DVI input only).
N/A Message
Display resolution, H/V frequency and the
input port used for current input timing
function.
N/A Restore
Restores system to default settings.
N/A Exit
Closes the OSD window and saves changes.
![background image](/manualsandmore/images/temp/1054/1054009.png)
Attachmen
Plug and play
The pr duct
the lat
compl
ated
consum
d
play
f ature
r co
r
easil
and s
func
The LCD moni
ansfers t
Data
(EDID) to your computer sys
so that your
an u
LCD
monitor.
ts
o
ic
provides
and time-
est VESA
plug and play
feature to prevent
ing installation procedures. The
plug an
e
y
allows you
et u its
mputer system to identify the LCD monito
p
tor tr
tions automatically.
he
Extended Display Identification
tem via the
Display Data Channel
(DDC),
y
y
computer c
se the self-setting function of the
Power saver
The LCD moni
uilt
y
When the LCD monitor is not
Contro Sys
tical
to save power. Move the mouse slightly or press any key to return
o
al o
y
The Power Saver function can only be operated by the display card
of the
ut
can set up this function from your computer.
y
The LCD mon
EK when used
with
SA D
To save power and extend the life of the product, turn off the LCD
monitor power supply when it is idle for a long time or not being
us
Troubleshooting
Power LED does
not light
y
Check that the power switch is turned on.
y
Ma
re t
cable
Icon off
y
Check that the power switch is turned on.
y
Make sure the power cable is connected.
y
Ensure that the signal cable is inserted in the receptacle
app
riate
y
The Power Saver may
he monitor automatically during the
operation. Make sure the monitor is restored when you press any key
from
e ke
Color default
Refer to "Color Temp. Adjust
or or select color
temper ture
Instability
or ripple
emove any electronic equip
in
renc
y
Check the signal cable of the monitor to ensure that none of the pins
are bent.
Image offset
or wrong size
y
Pr
he au
t
y
Set up the reference position.
tor has a b
-in Power Control System (Power Saver).
operated for a period of time, the Power
ly sets the system at low voltage status
l
tem automa
y
norm
peration.
comp
er sy
itor is compati
stem. You
ble with EPAENERGY STAR NÜT
VE
PMS.
t
y
ed.
ke su
he power
is connected.
rop
ly.
turn off t
th
yboard.
ment" to adjust RGB col
a
s.
y
ment in the vicinity that may cause EMI
terfe
e.
ess t
to adjustment bu ton to automatically optimize the screen.
y
R
8
![background image](/manualsandmore/images/temp/1054/1054010.png)
Technical specifications
Panel dimension
Diagonal 559 mm (22 inch) LCD monitor
Max. resolution
1,680 x 1,050 / WXGA+
Max. pixel
Up to 16.2 M true color
Pixel span
Horizontal 0.282mm x Vertical 0.282mm
Brightness 300
cd/m
2
Contrast
700 : 1
LC response time
5 ms
Vis
°
°
ual angle
Horizontal 170 / Vertical 160
LCD panel
(backlight
source)
Effective display
Horizontal 473.8 mm x Vertical 296.1 mm
Signal mode
Simulated video frequency: 0.7 Vpp, 75
Ω
(separate SYNC and composite SYNC)
SYNC
Horizontal 30 kHz – 82 kHz x Vertical 56 Hz – 76
frequency
Hz
Input signal
Max. pixel clock
135MHz
Input terminal
I-D (Optional)
Image
D-Sub 15 PIN (VESA) / DV
Power trans
rm
– 60 Hz
fo
er
AC100 – 240 Volts, 50
O
ration mode
48W
pe
Power saving sleep
mode
2W @230VAC 50Hz
Power
consumption
Power saving off mode 1W @230VAC 50Hz
Tem
°
C – 35
°
C (operation) / -20
°
C – 55
°
C (storage)
perature
5
Environmental
conditions
Humidity
20% – 80% (operation) / 20% – 85% (storage)
Actual dimensions (W x D x H)
513.5 x 198.2 x 405.2 mm
Net weight
4.9 kg
Safety standard
CE/EMC;C-Tick; BSMI; ISO
13406-2;EPA;PCT;NOM;WEEE;PSB;HG
TCO03;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;V
CCI-B;
Lamp disposal
ns
and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at
www.eiae.org
Lamp(s) i
ide this product contain mercury
. For lamp-specific disposal
information, check
www.lamprecycle.org
.
9
![background image](/manualsandmore/images/temp/1054/1054011.png)
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This
Class B digital apparatus meets all requirements of the Canadian Interference-
Regulations.
Cet appa
la cl
R
é
glement
sur le m
r du
Display modes
If
f your PC s
the following reference
signal modes, the screen
he screen
wi
ay or only
formation
ab
stment mod
o the instructions of your display card.
Display
Hor
Frequ
(kH
Vert.
Frequency
(Hz)
Pixel
Frequency
(MHz)
SYNC Polarity
(H/V)
Causing Equipment
reil num
é
rique de
ass B respecte toures les exigencies du
ateriel brouilieu
Canada.
the signal o
ystem is the same as one of
will be adjusted automatically. If not, t
the LED lights will display. For more in
ll not displ
out the adju
e, refer t
.
Mode
ency
z)
31.4
-/-
69 59.940 25.175
37.8
-
61 72.809 31.500
-/
VGA 640x480
37.500 75.000 31.500
-/-
35.1
+/+
56 56.250 36.000
37.879 60.317 40.000
+/+
48.077 72.188 50.000
+/+
SVGA 800x600
46.875 75.000
+/+
49.500
48.363 60.004
-/-
65.000
56.4
-/-
76 70.069 75.000
XGA 1024x768
60.023 75.029 78.750
+/+
SXGA 1152x864
67.5
108.000
+/+
00
75.000
63.981 60.020
108.000 +/+
S
79.9
XGA 1280x1024
76 75.025
135.000 +/+
WXGA+ 1440x900
55.935
55.887
106.5
-/+
VESA
WXGA+ 1680x1050
65.29 59.954 146.25 -/+
V
1.4
.322
-/+
GA TEXT
720x400
3
69
70.087
28
640x480 35.000
66.667
30.240 -/-
832x624 49.725
74.500
57.283 -/-
M
4x768 60.1
0.000
-/-
acintosh
102
50 74.720 8
10