Full Text Searchable PDF User Manual
Cod. 429597
Rev. 01/0106
Advanced Operation
Instructions
for washers
LOGI CONTROL
GIRBAU, S.A.
Crta de Manlleu, km. 1
08500 VIC (Barcelona)
•
SPAIN
Tel. 34 93 8861100
Fax 34 93 8860785
girbau@girbau.es
www.girbau.com
For USA & CANADA:
CONTINENTAL GIRBAU Inc.
2500 State Road 44
WI 54904 Oshkosh
•
USA
Tel. 1(920) 231-8222
Fax 1(920) 231-4666
info@cont-girbau.com
www.cont-girbau.com
LOGI
Advanced
Cod. 429597
Rev. 01/0106
Model
From serial #
High Speed
HS-6008
2.080.001
HS-6013
2.110.001
HS-6017
2.120.001
EH020
1.430.001
EH030
1.460.001
EH040
1.470.001
Medium Speed
MS-610
2.020.001
MS-613
2.030.001
MS-617
2.040.001
MS-623
2.050.001
EM025
1.370.001
EM030
1.380.001
EM040
1.390.001
EM055
1.400.001
Cod. 429597
Rev. 01/0106
3
Index
SAFETY INSTRUCTIONS
INDEX
........................................................................................................................................... 3
1. DESCRIPTION
1.1 Characteristics
1.2 Expected use of the washer
2. OPERATION INSTRUCTIONS
2.1 Control panel
2.2 Loading the washing machine
2.3 Using the dispenser
2.4 Starting a program
2.5 Modifying a program in progress
2.6 Wash programs
2.7 Stop modes
2.8 Unbalance
control
2.9 Delay option
3. ADVANCED USE MODE.
........................................................................................................ 4
3.1 Access to MODIFICATION mode .......................................................................................... 4
3.2. Modification of program contents. Pro menu ......................................................................... 4
3.2.1 Master program ........................................................................................................... 5
3.2.2 Default program contents. Non USA / CANADA application ....................................... 6
3.2.3 Default program contents. USA / CANADA application .............................................. 7
3.2.4 Default program contents. Great Britain application ..................................................... 8
3.2.5 Phases definition .......................................................................................................... 9
3.2.6 Definition of programmable functions and values for each phase ............................... 9
3.2.7 Modification of a program ........................................................................................... 10
3.3. Information menu. Info menu ................................................................................................. 14
3.4. Modification of operating parameters. Mod menu ............................................................... 14
3.4.1 Parameters modification ............................................................................................ 15
3.5. Modification of the access code. NCod menu ..................................................................... 16
3.6. Clock of the system. Hour Menu .......................................................................................... 17
3.6.1 To set the clock ........................................................................................................... 17
4. TROUBLESHOOTING
4.1 What to do when
4.2 System alarms
5. MAINTENANCE
5.1 Operations described
5.2 Cleaning the washer
5.3 Cleaning the door seal
5.4 Cleaning the electrovalve filters
5.5 Cleaning the dispenser
5.6 Cleaning the drain pump
5.7 Revising the safety mechanisms
5.8 General revision
6. SERVICE REMOVAL
6.1 Dismantling
NOTE
For the contents of
SAFETY INSTRUCTIONS
, chapters 1.
DESCRIPTION, 2. OPERATING
INSTRUCTIONS, 4. TROUBLESHOOTING, 5. MAINTENANCE
and 6.
SERVICE REMOVAL
, see
Operation Instructions LOGI CONTROL, supplied with the washer or request it to the manufacturer:
girbau@girbau.es
,
(USA/CANADA:
info@cont-girbau.com
).
Cod. 429597
Rev. 01/0106
4
Advanced Mode
3. ADVANCED USE MODE.
There is an advanced use mode: the
MOD
mode. This mode includes five different menus through which,
each user can personalise the operation of the washing machine.
Menus for advanced use mode:
MENU
PURPOSE
Pro
Modification of the program contents
INFO
Information menu
Mod
Modification of operation parameters
Ncod
Modification of the access code
HOUR
Adjustment of the system time
3.1. Access to MODIFICATION mode
Connect the washer and open the door. The display shows
door.
Hold
MOD
key until the display shows
Cod.
Enter the access code to the menus pressing, without interruption, the sequence of eight keys of the code. In
basic configuration (when the machine is delivered) the access code to
MODIFICATION
mode is:
12341234.
Numerical correspondence of each key
KEY
CORRESPONDENCE
MOD
1
V
2
ACCEL
3
W
4
If the sequence set is correct, report
Pro
will be showed in the display, corresponding to the first menu.
Keys
V
and
W
allow the selection of the precedent table menus. The menu selected is showed in the display
following its key word. To enter in it, press the
MOD
key when displaying it.
If wished to skip the
MODIFICATION
mode, press
STOP
and machine will return to programs execution
mode.
Disconnecting the electrical supply to the washing machine can also exit the
MODIFICATION
mode.
3.2. Modification of programs contents. Pro menú.
In its original configuration, the washing machine has eight wash programs with content adapted to a wide
range of usage. However, the content of each program can be modified to be adapted to the specific needs
of different situations.
The modifications will always be carried out starting from a MASTER PROGRAM that understands the
programmable parameters and the maximum and minimum values of certain options.
The master program is composed of nine phases. At the start of each phase, a parameter of the value
PH-Y
/ Ph-N
(execute
YES
phase / execute
NO
phase) will allow the user to determine if the accessed phase
should be executed or, on the contrary, be omitted.
Once the phase is defined as to be executed, proceed to the display and modification (if desired) of the
parameters or values of the phase.
Cod. 429597
Rev. 01/0106
5
Advanced Mode
3.2.1. Master program
EXECUTION
LEVEL
TEMP.
DOSING
ROTATION
ROTATION
TIME
COOL
DOWN
PAUSE EXTRACT
EXTRACT
TIME
PHASE
Ph
L
C / F
d
r
rt
c
rh
E
Et
1
Y / N
1…4
0 ... 40
32 ... 104
0 / 1
1...3
1...8
n.p.
n.p.
1
n.p.
2
Y / N
1…4
0 ... 40
32 ... 104
0 / 1
1...3
1...8
n.p.
n.p.
1
n.p.
3
Y / N
1…4
0 ... 40
32 ... 104
0 / 1
1...3
1...8
n.p.
n.p. 1...3
n.p.
2...4
4
Y 1…4
0 ... 90
32 ... 194
2
1...3
1...20
0 / 1
n.p.
0...2
n.p. 2...3
5
Y / N
1…4
0 ... 40
32 ... 104
0 / 3
1...3
1...8
n.p.
n.p. 1...3
n.p.
2...4
6
Y / N
1…4
n.p.
n.p.
1...3
1...8 n.p.
n.p. 1 n.p.
7
Y / N
1…4
n.p.
n.p.
1...3
1...8 n.p.
n.p. 1 n.p.
8
Y / N
1…4
n.p.
n.p.
1...3
1...8 n.p.
n.p. 1 n.p.
9
Y 1…4
0 ... 40
32 ... 104
0 / 4
1...3
1...8
n.p.
0 / 1
1...6
n.p. 2...9
Refer to
section 3.2.5
for the definition of functions and programmable values of each phase.
Cod. 429597
Rev. 01/0106
6
Advanced Mode
3.2.2. Programs contents. General application.
P
R
-
1. E
XTRA HEAVY SOIL
-
W
HITE
65
MIN
P
R
-
2. H
EAVY SOIL
-
W
HITE
59
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
Y
2
20
1
1
4
- - - - - -
1
- - -
1
Y
2
20
0
1
4
- - - - - -
1
- - -
2
Y
2
40
0
1
2
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
3
Y
2
60
1
1
6
- - - - - -
3
3
3
Y
2
30
1
1
6
- - - - - -
3
3
4
Y
1
80
2
1
12
0
- - -
2
2
4
Y
1
60
2
1
10
0
- - -
2
2
5
Y
2
40
3
1
6
- - - - - -
3
3
5
Y
2
40
3
1
6
- - - - - -
3
3
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
7
N
3
- - - - - -
1
2
- - - - - -
1
- - -
7
N
3
- - - - - -
1
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 1
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
9
Y 2 0 4 1 4
-
-
-
0 6 7
9
Y 2 0 4 1 4
-
-
-
0 6 7
P
R
-
3. M
EDIUM SOIL
–
W
HITE
51
MIN
P
R
-
4. L
IGHT SOIL
–
W
HITE
37
MIN
Ph
L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
2
30
0
1
4
- - - - - -
1
- - -
1
N
2
30
0
1
4
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
3
Y
2
30
1
1
6
- - - - - -
3
3
3
N
2
30
1
1
6
- - - - - -
3
3
4
Y
1
50
2
1
8
0
- - -
2
2
4
Y
1
40
2
1
6
1
- - -
0
- - -
5
Y
2
30
3
1
6
- - - - - -
3
3
5
Y
2
30
3
1
6
- - - - - -
3
3
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
6
Y
3
- - - - - - 1
2
- - - - - -
1
- - -
7
N
3
- - - - - - 1
2
- - - - - - 1
- - -
7
N
3
- - - - - - 1
2
- - - - - - 1
- - -
8
Y
3
- - - - - - 1
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 1
2
- - - - - - 1
- - -
9
Y 2 0 4 1 4
-
-
-
0 6 7
9
Y 2 0 4 1 4
-
-
-
0 6 7
P
R
-
5. H
EAVY SOIL
–
C
OLOR
51
MIN
P
R
-
6. M
EDIUM SOIL
–
C
OLOR
40
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
2
40
0
2
4
- - - - - -
1
- - -
1
N
2
30
0
2
4
- - - - - -
1
- - -
2
Y
2
0
0
2
4
- - - - - -
1
- - -
2
N
2
0
0
2
2
- - - - - -
1
- - -
3
Y
2
30
1
2
6
- - - - - -
3
3
3
Y
2
30
1
2
4
- - - - - -
2
2
4
Y
1
40
2
1
10
0
- - -
2
2
4
Y
1
40
2
1
8
0
- - -
2
2
5
Y
3
0
0
2
2
- - - - - -
3
3
5
Y
3
0
0
2
2
- - - - - -
3
3
6
N
3
- - - - - -
2
2
- - - - - -
1
- - -
6
N
3
- - - - - - 2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 2
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
2
2
- - - - - -
1
- - -
9
Y 2 0 4 2 4
-
-
-
0 6 7
9
Y 2 0 4 2 4
-
-
-
0 6 7
P
R
-
7. S
YNTHETICS
30
MIN
P
R
-
8. W
OOL AND DELICATES
32
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
3
30
0
2
4
- - - - - -
1
- - -
1
N
3
0
0
3
4
- - - - - -
1
- - -
2
N
3
0
0
2
2
- - - - - -
1
- - -
2
N
3
0
0
3
2
- - - - - -
1
- - -
3
N
2
40
1
2
4
- - - - - -
2
2
3
Y
3
0
1
3
4
- - - - - -
1
- - -
4
Y
1
40
2
2
6
0
- - -
2
2
4
Y
2
30
2
2
8
1
- - -
1
- - -
5
Y
3
0
0
2
2
- - - - - -
3
3
5
Y
3
0
0
3
2
- - - - - -
1
- - -
6
N
3
- - - - - -
2
2
- - - - - -
1
- - -
6
N
3
- - - - - - 3
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
3
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 2
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
3
2
- - - - - -
1
- - -
9
Y 2 0 4 2 4
-
-
-
0 6 6
9
Y 3 0 4 3 4
-
-
-
0 4 3
Cod. 429597
Rev. 01/0106
7
Advanced Mode
3.2.3. Programs contents. USA / CANADA application.
P
R
-
1. E
XTRA HEAVY SOIL
-
W
HITE
27
MIN
P
R
-
2. H
EAVY SOIL
-
W
HITE
22
MIN
Ph Ph L
F
d
r
rt cd rh
E
Et
Ph Ph
L
F
d
r
rt cd rh
E
Et
1
N
2
104
1
1
4
- - - - - -
1
- - -
1
N
2
104
0
1
4
- - - - - -
1
- - -
2
N
2
32
0
1
2
- - - - - -
1
- - -
2
N
2
32
0
1
2
- - - - - -
1
- - -
3
N
2
104
1
1
6
- - - - - -
3
3
3
N
2
104
1
1
6
- - - - - -
3
3
4
Y
1
113
2
1
9
0
- - -
1
- - -
4
Y
1
104
2
1
6
0
- - -
1
- - -
5
Y
2
32
3
1
2
- - - - - -
3
2
5
Y
2
32
3
1
3
- - - - - -
3
2
6
N
3
- - -
- - 1
1
- - - - - -
1
- - -
6
N
3
- - -
- -
1
1
- - - - - -
1
- - -
7
N
3
- - -
- - 1
1
- - - - - -
1
- - -
7
N
3
- - -
- -
1
1
- - - - - -
1
- - -
8
Y
2
- - - - - 1
1
- - - - - -
1
- - -
8
N
3
- - -
- -
1
1
- - - - - -
1
- - -
9
Y 2 32 4 1 2 -
-
- 0 6 5
9
Y
2
32
4
1
2
- - -
0
6
5
P
R
-
3. M
EDIUM SOIL
–
W
HITE
22
MIN
P
R
-
4. L
IGHT SOIL
–
W
HITE
20
MIN
Ph Ph L
F
d
r
rt cd rh
E
Et
Ph Ph
L
F
d
r
rt cd rh
E
Et
1
N
2
86
0
1
4
- - - - - -
1
- - -
1
N
2
86
0
1
4
- - - - - -
1
- - -
2
N
2
32
0
1
2
- - - - - -
1
- - -
2
N
2
32
0
1
2
- - - - - -
1
- - -
3
N
2
104
1
1
6
- - - - - -
3
3
3
N
2
86
1
1
6
- - - - - -
3
3
4
Y
1
86
2
1
6
0
- - -
1
- - -
4
Y
1
68
2
1
4
1
- - -
1
- - -
5
Y
2
32
3
1
3
- - - - - -
3
2
5
Y
2
32
3
1
3
- - - - - -
3
2
6
N
3
- - -
- -
1
1
- - - - - -
1
- - -
6
N
3
- - -
- - 1
1
- - - - - -
1
- - -
7
N
3
- - -
- -
1
1
- - - - - - 1
- - -
7
N
3
- - -
- - 1
1
- - - - - - 1
- - -
8
N
3
- - -
- -
1
1
- - - - - -
1
- - -
8
N
3
- - -
- -
1
1
- - - - - - 1
- - -
9
Y 2 32 4 1 2 -
-
- 0 6 5
9
Y
2
32
4
1
2
- - -
0
6
5
P
R
- 5. H
EAVY SOIL
–
C
OLOR
22 min
P
R
- 6. M
EDIUM SOIL
–
C
OLOR
21 min
Ph Ph L
F
d
r
rt cd rh
E
Et
Et
Ph Ph
L
F
d
r
rt cd rh
E
Et
1
N
2
104
0
2
4
- - - - - -
1
- - -
1
N
2
86
0
2
4
- - - - - -
1
- - -
2
N
2
32
0
2
4
- - - - - -
1
- - -
2
N
2
32
0
2
2
- - - - - -
1
- - -
3
N
2
104
1
2
6
- - - - - -
3
3
3
N
2
104
1
2
4
- - - - - -
2
2
4
Y
1
104
2
1
8
0
- - -
1
- - -
4
Y
1
104
2
1
6
0
- - -
1
- - -
5
Y
2
32
0
2
1
- - - - - -
3
2
5
Y
2
32
0
2
1
- - - - - -
3
2
6
N
3
- - -
- -
2
1
- - - - - -
1
- - -
6
N
3
- - - - -
2
1
- - - - - -
1
- - -
7
N
3
- - -
- -
2
1
- - - - - -
1
- - -
7
N
3
- - - - -
2
1
- - - - - -
1
- - -
8
N
3
- - -
- -
2
1
- - - - - -
1
- - -
8
N
3
- - - - -
2
1
- - - - - -
1
- - -
9
Y 2 32 4 2 2 -
-
- 0 6 5
9
Y
2
32
4
2
3
- - -
0
6
5
P
R
-
7. S
YNTHETICS
18
MIN
P
R
-
8. W
OOL AND DELICATES
17
MIN
Ph Ph L
F
d
r
rt cd rh
E
Et
Ph Ph
L
F
d
r
rt cd rh
E
Et
1
N
3
32
0
2
4
- - - - - -
1
- - -
1
N
3
32
0
3
4
- - - - - -
1
- - -
2
N
3
32
0
2
2
- - - - - -
1
- - -
2
N
3
32
0
3
2
- - - - - -
1
- - -
3
N
2
32
1
2
4
- - - - - -
2
2
3
N
3
32
1
3
4
- - - - - -
1
- - -
4
Y
1
86
2
2
4
0
- - -
1
- - -
4
Y
2
68
2
2
6
1
- - -
1
- - -
5
Y
2
32
0
2
1
- - - - - -
3
2
5
Y
2
32
0
3
1
- - - - - -
1
- - -
6
N
3
- - -
- -
2
1
- - - - - -
1
- - -
6
N
3
- - -
- -
3
1
- - - - - -
1
- - -
7
N
3
- - -
- -
2
1
- - - - - -
1
- - -
7
N
3
- - -
- -
3
1
- - - - - -
1
- - -
8
N
3
- - -
- -
2
1
- - - - - -
1
- - -
8
N
3
- - -
- -
3
1
- - - - - -
1
- - -
9
Y 2 32 4 2 2 -
-
- 0 6 5
9
Y 2 32 4 3 2 -
-
- 0 4 3
Cod. 429597
Rev. 01/0106
8
Advanced Mode
3.2.4. Programs contents. Great Britain application.
P
R
-
1. H
EALTHCARE
49
MIN
P
R
-
2. H
EAVY SOIL
–
W
HITE
59
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
2
40
1
1
4
- - - - - -
1
- - -
1
Y
2
20
0
1
4
- - - - - -
1
- - -
2
Y
2
0
0
1
2
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
3
Y
2
0
1
1
2
- - - - - -
3
3
3
Y
2
30
1
1
6
- - - - - -
3
3
4
Y
1
65
2
1
12
0
- - -
2
2
4
Y
1
60
2
1
10
0
- - -
2
2
5
Y
2
40
3
1
6
- - - - - -
1
- - -
5
Y
2
40
3
1
6
- - - - - -
3
3
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
7
N
3
- - - - - -
1
2
- - - - - -
1
- - -
7
N
3
- - - - - -
1
2
- - - - - -
1
- - -
8
N
3
- - - - - - 1
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
9
Y 2 0 4 1 4
-
-
-
0 6 7
9
Y 2 0 4 1 4
-
-
-
0 6 7
P
R
-
3. M
EDIUM SOIL
–
W
HITE
51
MIN
P
R
-
4. L
IGHT SOIL
–
W
HITE
37
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
2
30
0
1
4
- - - - - -
1
- - -
1
N
2
30
0
1
4
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
2
N
2
0
0
1
2
- - - - - -
1
- - -
3
Y
2
30
1
1
6
- - - - - -
3
3
3
N
2
30
1
1
6
- - - - - -
3
3
4
Y
1
50
2
1
8
0
- - -
2
2
4
Y
1
40
2
1
6
1
- - -
0
- - -
5
Y
2
30
3
1
6
- - - - - -
3
3
5
Y
2
30
3
1
6
- - - - - -
3
3
6
Y
3
- - - - - -
1
2
- - - - - -
1
- - -
6
Y
3
- - - - - - 1
2
- - - - - -
1
- - -
7
N
3
- - - - - - 1
2
- - - - - - 1
- - -
7
N
3
- - - - - - 1
2
- - - - - - 1
- - -
8
Y
3
- - - - - - 1
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 1
2
- - - - - - 1
- - -
9
Y 2 0 4 1 4
-
-
-
0 6 7
9
Y 2 0 4 1 4
-
-
-
0 6 7
P
R
-
5. H
EAVY SOIL
–
COLOR
51
MIN
P
R
-
6. M
EDIUM SOIL
-
COLOR
40
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
2
40
0
2
4
- - - - - -
1
- - -
1
N
2
30
0
2
4
- - - - - -
1
- - -
2
Y
2
0
0
2
4
- - - - - -
1
- - -
2
N
2
0
0
2
2
- - - - - -
1
- - -
3
Y
2
30
1
2
6
- - - - - -
3
3
3
Y
2
30
1
2
4
- - - - - -
2
2
4
Y
1
40
2
1
10
0
- - -
2
2
4
Y
1
40
2
1
8
0
- - -
2
2
5
Y
3
0
0
2
2
- - - - - -
3
3
5
Y
3
0
0
2
2
- - - - - -
3
3
6
N
3
- - - - - -
2
2
- - - - - -
1
- - -
6
N
3
- - - - - - 2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 2
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
2
2
- - - - - -
1
- - -
9
Y 2 0 4 2 4
-
-
-
0 6 7
9
Y 2 0 4 2 4
-
-
-
0 6 7
P
R
-
7. S
YNTHETICS
30
MIN
P
R
-
8. W
OOL AND DELICATES
32
MIN
Ph Ph L
C
d
r
rt cd rh
E
Et
Ph Ph
L
C
d
r
rt cd rh
E
Et
1
N
3
30
0
2
4
- - - - - -
1
- - -
1
N
3
0
0
3
4
- - - - - -
1
- - -
2
N
3
0
0
2
2
- - - - - -
1
- - -
2
N
3
0
0
3
2
- - - - - -
1
- - -
3
N
2
40
1
2
4
- - - - - -
2
2
3
Y
3
0
1
3
4
- - - - - -
1
- - -
4
Y
1
40
2
2
6
0
- - -
2
2
4
Y
2
30
2
2
8
1
- - -
1
- - -
5
Y
3
0
0
2
2
- - - - - -
3
3
5
Y
3
0
0
3
2
- - - - - -
1
- - -
6
N
3
- - - - - -
2
2
- - - - - -
1
- - -
6
N
3
- - - - - - 3
2
- - - - - -
1
- - -
7
N
3
- - - - - -
2
2
- - - - - -
1
- - -
7
N
3
- - - - - -
3
2
- - - - - -
1
- - -
8
Y
3
- - - - - - 2
2
- - - - - -
1
- - -
8
Y
3
- - - - - -
3
2
- - - - - -
1
- - -
9
Y 2 0 4 2 4
-
-
-
0 6 6
9
Y 3 0 4 3 4
-
-
-
0 4 3
Cod. 429597
Rev. 01/0106
9
Advanced Mode
3.2.5. Phases definition.
PHASES
DEFINITION
1, 2, 3
4
5
6 - 8
9
Soaking and pre-washes
. Optional execution phases. Water heating is permitted only in
machines with heating.
Washing
. Obligatory execution phase. The mixing of hot and cold water and/or water heating is
permitted.
First Rinse
. Optional execution phase. The mixing of hot and cold water is permitted and/or
water heating. Dosing of bleach included in some programs.
Second, third and fourth rinses
. Optional execution phase.
Final Rinse
. Obligatory execution phase. The mixing of hot and cold water is permitted and/or
water heating. Dosing of softener included and final extract.
3.2.6. Definition of programmable functions and values for each phase
PARAMETER
CONCEPT
OPTIONS
Ph-Y
Phase able to be executed
Ph
Phase execution
Ph-N
Phase unable to be executed
L-1
Low level
L-2
Medium level
L-3
High level
(Level not programmable in machines with pump drain)
L
Bath level
L-4
Extra high level
(Level not programmable in machines with pump drain)
0 /
77
Programmable range in Centigrade degrees
32 /
777
Programmable range in Fahrenheit degrees
C / F
Bath temperature
n.p
Not possible to program temperature in phase
d-0
Phase without dosing
d-1
Dosing of pre-wash detergent
d-2
Dosing of wash detergent
d-3
Dosing of bleach
d-4
Dosing of softener or neutraliser
d
Dosing
n.p.
Not possible to program dosing in phase
r-1
Heavy-duty rotation: 25 sec. ON - 5 sec. OFF
r-2
Normal rotation: 15 sec. ON - 15 sec. OFF
r
Type of rotation
r-3
Delicate rotation: 5 sec. ON - 25 sec. OFF
1...8
Programmable range in soak, pre-wash and rinse phases
rt
Rotation time
(in minutes)
1...20
Programmable range in wash phase
0
Without progressive cool-down
1
Progressive cool-down in wash phase
c
Progressive
cool down
n.p
Option not programmable
0
Without stop in final rinse
1
Stop in final rinse
rh
Program stop in final
rinse
n.p
Option not programmable
0
Phase without drain
1
Drain + wash speed
2
Drain + positioning speed
3
Drain + low extract speed
4
Drain + medium extract speed
5
Drain + medium/high extract speed
E
Bath drain
6
Drain + high extract speed
Et
Extract time
77
In minutes
Cod. 429597
Rev. 01/0106
10
Advanced Mode
3.2.7. Modification of a program
Access the
MODIFICATION
mode
(section 3.1)
The display will indicate
Pro
.
Press the
MOD
key to access the
PROGRAMMING
menu.
The display will indicate
Pr-1
. Ready to modify program 1. The
V
/
W
keys are used to select another
program. Press the
MOD
key to access the modification of the displayed program.
The display will indicate
Ph-1
. Ready to modify phase 1. The
V
/
W
keys are used to select another phase.
Press the
MOD
key to start the modification to the values of the selected phase.
When the number of the phase is displayed (start of phase), the
STOP
key is used to finalise the program
modification.
Once finalised the modification of a program, the display will show the
Pr-
7
report. (modified program). A
pulsation on key
STOP
allows to access at the superior level of the menu. Two consecutive pulsations allow
exiting the
MODIFICATION
mode.
Activation of the phase
Allows programming the execution of the selected phase.
Once the desired phase to be modified has been selected, press the
MOD
key. The display will indicate
Ph-
7
.
OPTIONS MEANING
Ph-Y
Availability of the phase to be executed
Ph-N
Unavailability of the phase to be executed
The
V
key will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Bath level.
Allows the selection of bath level inside the washer.
OPTIONS MEANING
L-1
Low level
L-2
Medium level
L-3
High level
L-4
Extra high level
For safety, the options
L-3
and
L-4
are not programmable in machines with pump drain.
The
V
/
W
keys will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Bath temperature
Allows modifying the water temperature in the phases in which this function is available. In other phases, it is
not possible to program the water temperature.
OPTIONS
MEANING
C-00 ... C-40
F 32 ... F 104
Range of programmable temperature in soak, prewash and
rinses phases.
C-
77
:
Centigrade degrees
F
777
:
Fahrenheit degrees
C-00 ... C-90
F 32 ... F 194
Range of programmable temperature in wash phase.
C-
77
:
Centigrade degrees
F
777
:
Fahrenheit degrees
The
V
/
W
keys will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Cod. 429597
Rev. 01/0106
11
Advanced Mode
Dosing.
Permits to activate or deactivate dosing that appear in the master table.
OPTIONS MEANING
d-0
Without dosing
d-1
External dosing of soak and pre-wash detergent
d-2
External dosing of wash detergent
d-3
Bleach dosing
d-4
Softener or neutraliser dosing
n.p.
Not possible to program dosing in the phase
The first executed soak or pre-wash phase doses the deposited detergent in the pre-wash compartment of
the washer dispenser. In these phases water enters through this compartment.
The wash phase doses the product located at the wash compartment of the washer dispenser. In the wash
phase the water enters through this compartment.
Options
d-1
and
d-2
only control the external product dosing.
Options
d-3
and
d-4
control the entry of water into the corresponding compartment of the dispenser and the
external product dosing.
The
V
key will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Rotation
The mechanical action of the washing machine regarding the laundry is different according to the selected
rotation.
Time
ON
: drum in rotation
Time
OFF
: drum stopped.
OPTIONS MEANING
r-1
Heavy duty rotation
ON
: 25 sec.
OFF
: 5 sec.
r-2
Normal rotation
ON
: 15 sec.
OFF
: 15 sec.
r-3
Gentle rotation
ON
: 5 sec.
OFF
: 25 sec.
The
V
key will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Rotation time
Rotation time programmed in the phase. It is valued in minutes.
This time is started once the programmed temperature and level are reached.
OPTIONS MEANING
1 ... 8
Programmable range in the soak, pre-wash and rinse phases
1 ... 20
Programmable range in the wash phase
The
V
/
W
keys will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Progressive cool down
Progressive cool-down of the water is done by adding cold water until a temperature of 45ºC (113ºF) is
reached.
This function will appear only in the wash phase if the programmed temperature is over 50ºC (122ºF).
Cod. 429597
Rev. 01/0106
12
Advanced Mode
OPTIONS MEANING
c-0
Progressive cool-down deactivated
c-1
Progressive cool-down activated
The
V
key will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Crease guard stop
All the functions of the washing machine stop, maintaining the water inside, with a light rotation of the drum
at 15 minute intervals. This is only programmable in the final phase of the program.
This function is designed to avoid the laundry remaining for a long time inside the drum, once the final spin is
finished, thus avoiding the appearance of creases.
OPTIONS MEANING
rh-0
Crease guard stop OFF
rh-1
Crease guard stop ON
The
V
key will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Bath drain
The draining of the water from the washing machine is done through the activation of the drain system, either
by pump or by gravity at the same time the drum is rotating.
Option
E-1
implies an unchangeable time value. The duration of options
E-2 – E-6
is programmable within a
determined range.
OPTIONS MEANING
E-0
Phase without drain
E-1
Drain + wash speed
E-2
Drain + positioning speed
E-3
Drain + low extract speed
E-4
Drain + medium extract speed
E-5
Drain + medium/high extract speed
E-6
Drain + high extract speed
R.P.M. FOLLOWING MACHINE MODEL
OPTIONS
MS-620
EM025
HS-6008
EH020
HS-6013
EH030
HS-6017
EH040
E-0
- - - -
- - - -
- - - -
- - - -
E-1
50 50 49 45
E-2
99 101 100 99
E-3
306 580 400 350
E-4
402 690 600 550
E-5
503 780 800 750
E-6
600 970 1005 950
The
V
/
W
keys will modify the displayed option.
The
MOD
key validates the displayed selection and allows access to the following programmable function.
Cod. 429597
Rev. 01/0106
13
Advanced Mode
Extract time
Extract time programmed in the phase. It is valued in minutes.
OPTIONS MEANING
n.p.
Drain time
E-1
2 ... 4
Programmable range in not final phase of the program
2 ... 9
Programmable range in final phase of the program
The
V
/
W
keys will modify the displayed option.
The
MOD
key validates the displayed selection and ends the phase programming.
Display shows the following phase.
When finalising the programming of the last phase of the program, display shows
Pr-
7
(modified program)
Cod. 429597
Rev. 01/0106
14
Advanced Mode
3.3. Information menu. INFO menu
PARAMETERS
MEANING
LOGI
6666
Type of control
Washer’s model
EP
77
Version of program
Pr
Number of cycles executed
SUD
Number of times the anti-suds function has been activated
Access the
MODIFICATION
menu.
Section 3.1.
Display shows
Pro.
Press
V
key. Display shows
INFO.
Press the
MOD
key to sequentially access the listing of the different parameters and the values of the
corresponding counters.
Once the last option is listed, press the
MOD
key. Display shows
INFO
.
The
V
/
W
keys allow the access to other menus.
To exit the
MODIFICATION
menu press the
STOP
key.
3.4. Modification of operating parameters. Mod menu.
The
Mod
menu allows the modification of the operation parameters of all the programs.
The modifications carried out from
Mod
menu affects the eight programs.
Summary table of the changeable parameters:
PARAMETER
MODIFICATION OF
OPTIONS
CE USA
b-0
Without buzzer
b-1
Low buzzer
b-2
Normal buzzer
Í
Í
b
Buzzer
b-3
Strong buzzer
C
Temperature displayed in Centigrade degrees
Í
C / F
Temperature unit
F
Temperature displayed in Fahrenheit degrees
Í
AC-0
Without acceleration permission
AC
Program acceleration
AC-1
With acceleration permission
Í
Í
SP-0
Without suds prevention
Í
Í
SP-1
First level of suds prevention
SP
Levels of suds
prevention
SP-2
Second level of suds prevention
tS-0
Wash temperature selection disabled.
tS
Wash temperature
selection when
starting program
tS-1
Wash temperature selection enabled.
Í
Í
Í
Indicates default option following configuration.
Cod. 429597
Rev. 01/0106
15
Advanced Mode
3.4.1. Parameters modification
Access the
MODIFICATION
mode.
Section 3.1.
Display shows
Pro.
Press key
V
twice. In the display reports
INFO, Mod
are showed successively.
Press the
MOD
key to display the first parameter.
Buzzer
The door safety unlock can be advised by the sounding of a beep. The duration of this warning is
programmable.
OPTIONS MEANING
b-0
Buzzer OFF
b-1
Low buzzer: two beep
b-2
Normal buzzer: four beep
b-3
Strong buzzer: six beep
The key
V
allows the modification of the option displayed.
The
MOD
key validates the selection on the display and permits the access to the following programmable
function.
Temperatura unit
The bath water temperature can be displayed in Centigrade or Fahrenheit degrees.
OPTIONS MEANING
C
Temperature unit in Centigrade degrees
F
Temperature unit in Fahrenheit degrees
The key
V
allows the modification of the option displayed.
The
MOD
key validates the selection on the display and permits the access to the following programmable
function.
Program acceleration
Program acceleration can reduce the time of the programs accessing to functions or subsequent phases, or
reducing the times of rotation and spinning. There is also the possibility to increment the rotation times.
The option
AC
enables or disables the utilisation of the
ACCEL
(acceleration) key
OPTIONS MEANING
AC-0
Acceleration option disabled
AC-1
Acceleration option enabled
The key
V
allows the modification of the option displayed.
The
MOD
key validates the selection on the display and permits the access to the following programmable
function.
Suds prevention program
Certain detergents commonly used in some countries produce large quantities of suds and can complicate
the proper functioning of the wash programs.
To mitigate this complication it is advisable to use the anti-suds program.
The anti-suds program consists of TWO levels of prevention. Each level of prevention involves a light
increment in the duration of the program and of the consumption of water and energy.
Once programmed, the prevention is activated automatically in the case that the washing machine detects
excessive suds within the interior of the drum.
Cod. 429597
Rev. 01/0106
16
Advanced Mode
OPTIONS MEANING
SP-0
Without suds prevention
SP-1
First level of suds prevention
SP-2
Second level of suds prevention
The key
V
allows the modification of the option displayed.
The
MOD
key validates the selection on the display and permits the access to the following programmable
function.
Quick wash temperature selection
This option disables the possibility to modify the wash phase temperature for the following programme.
OPTIONS MEANING
tS-0
Wash temperature selection disabled.
tS-1
Wash temperature selection enabled.
The key
V
allows the modification of the option displayed.
The
MOD
key validates the selection on the display. Display shows
Mod
.
The keys
V
/
W
allow the access to other menus.
To exit the
MODIFICATION
mode press the
STOP
key.
3.5. Modification of the access code to MODIFICATION mode. Ncod menu.
As it is described in
section 3.1
, the access to
CONFIGURATION
mode is restricted with an access code.
This code can be modified by the user if he wants to.
It must always contain a combination of
EIGHT
keys
Access code modification.
Access the MODIFICATION mode.
Section 3.1.
Display shows
Pro.
Press the
V
key three times.
INFO, Mod, Ncod
reports will be showed in the display successively.
Press the
MOD
key to set a new code. All the information of the display goes out.
Enter a combination of eight keys using the four central keys in the control panel.
The key pushed is displayed in the display as follows:
KEY
CORRESPONDENCE
MOD 1
V
2
ACCEL 3
W
4
At the end of the sequence the
SURE
report will be showed.
Confirm the new code with the
ACCEL
key.
If you don’t want to validate the code, push the
STOP
key.
Display will show
Ncod
.
The keys
V
/
W
allow the access to other menus.
To exit the
MODIFICATION
mode press the
STOP
key.
NOTE
.
If you forget the modified code, call the Service department to restore the original code.
Cod. 429597
Rev. 01/0106
17
Advanced Mode
3.6. Clock of the system. Hour menu
The access to this menu is only possible if the option clock is available.
This menu allows the user to enquire and / or modify the hour in the system.
The clock must be at the real time for the proper operation of the starting time.
3.6.1 To set de clock
Access the
MODIFICATION
mode.
Section 3.1.
Display shows
Pro.
Press the
V
key four times.
INFO, Mod, Ncod, Hour
reports will be showed in the display successively.
When displaying
Hour
push the
MOD
key. The
SURE
report will be displayed.
The control of the washing machine asks for the confirmation of the access command for the time
modification.
To exit the
Hour
menu, push
STOP
Push
ACCEL
to access the modification of the clock time.
The hour of the system is showed in the display in the format: hh.mm (hour format: 24 hours).
The changeable parameters are showed flashing.
Push the
ACCEL
key to pass from the minute modification to the hour modification.
Change the selected value with the
V
/
W
keys.
Push the
MOD
key to validate the selection.
STOP
allows leaving the menu without validating the modification.
After validating the time selection,
Hour
is showed in the display.
The
V
/
W
keys allow the access to other menus.
To exit the
MODIFICATION
mode press the
STOP
key. The washing machine can carry out the programs.