PDF User Manual

Warning card

FCC Declaration of Conformity

CE EU Declaration of Conformaty 

12

13

14

Your monitor
Pedestal
AC Power cord
D-sub Signal cable
This manual

step 1

step 2

step 3

2.1 Install the pedestal

To attach the base to your monitor, please following the steps for 
installation of the pedestal as below:

(1) VGA  Signal Cable

Note: (3) only for monitor with speaker function

Audio in

(3)

AC Power cable

(2)

2.2.1 Turn off your computer and unplug its power cable.

2.2.2 C

power jack on the back of your monitor

onnect the power cord to the 

. 

2.2.4

 Plug the computer and monitor power cables into a nearby outlet.

 Turn your computer and monitor on, if your monitor display an image, you

         have successfully installed the monitor. If the monitor does not display an

         Image, check  all the  connections.

2.2.3

1

2

2

3

4

5

(1) VGA  Signal Cable

Note: (3) only for monitor with speaker function

Audio in

(3)

AC Power cable

(2)

1

 VGA  Signal Cable

2

 AC Power cable

3

Audio cable

4.1 SWITCHING THE MONITOR ON/OFF

This ON/OFF button is used for switching the monitor on and off.
 Note: The ON/OFF switch does not disconnect the device from the 
mains voltage. To completely disconnect the mains voltage. 
Please remove the power plug from the socket.

4.2 POWER INDICATOR

This indicator lights up green or blue when the monitor operates normally.
 if the monitor is in power saving mode, this indicator change to orange. 
when monitor is turn off, this indicator change the color to dark.

4.3 VOLUME

This feature adjust the     button to decrease the volume and
      button to increase the volume. 

Important information on audio playback 

To achieve optimum sound quality from the monitor speakers, 
the audio cable should be connected to the Line-Out socket
(headphone socket) of the computer. If you connect the audio cable 
to the Speaker-Out socket (soundcard) of the computer, Please set 
the volume under Windows to range between 20% - 40% of the 
maximum value to achieve optimum sound quality.

4.4 MENU FEATURES

The following features can all be accessed by using your monitor's on 
screen menu system. Once are finished. Making adjustments to a feature, 
selecting the exit icon to turn off the menu.

Please follow the procedure of selection and adjust an item using the OSD 
system as below steps for main functions adjustment.

Step 1:

Press the      button to activate the OSD menu.
The main menu appears on the screen with icons for the
setting functions.

Step 2:

If necessary, use the      or       button to mark an
other icon.

Step 3:

Press the       button to activate the highlighted icon.

Step 4:

Use the       or       button to make the desired setting.

Step 5:

Select the EXIT symbol to exit the OSD menu.

Step 6:

Repeat step 2 through 5 to make further adjustments.

All changes are stored immediately

Color Select Menu

4.5

4.6

Mode 

Resolution 

Horizontal 

Vertical 

1 

720 x 400 

31.47 kHz 

70 Hz 

2 

640 x 480 

31.47 kHz 

60 Hz 

3 

640 x 480 

37.86 kHz 

72.8 Hz 

4 

640 x 480 

37.5 kHz 

75 Hz 

5 

800 x 600 

37.88 kHz 

60.3 Hz 

6 

800 x 600 

48.08 kHz 

72.2 Hz 

7 

800 x 600 

46.87 kHz 

75 Hz 

8 

1024 x 768 

48.36 kHz 

60 Hz 

9 

1024 x 768 

56.48 kHz 

70.1 Hz 

10 

1024 x 768 

60.02 kHz 

75 Hz 

11 

1280x1024 

63.98 kHz 

60.02 Hz 

12 

1280x1024 

80.0 kHz 

75 Hz 

5.1 Products Specifications 

Inch Size 

Max.

Resolution

Recommend  Resolution 

Horizontal  Freq. 

Vertical  Freq. 

Active  Display  Area 

Bandwidth 

User  Control 

OSD  Functions

Adapter  power  input 

Power  Consumption 
(under) 

Connector  Signal 

Dimension  (Packing) 

Weight

Gross/Net 

Multimedia  Feature 

1024*768@75 Hz

1024*

Hz

30-60  KHz 

60-75  Hz 

304*228  mm 

80 MHz 

4  Key  Sw 

g

Bri htness,  contrast, 

H-position, V-position, 

H-Size, 

phase,

Color,

auto, 

Reset, 

language, 

OSD, 

Exit, 

AC 

100V 

to 

240 

V

36 

W 

D-Sub 

15Pin

408 

(W) 

x 

400(H) 

x 

140 

(D) 

mm 

4.8 

Kg/3.3 

Kg 

Ÿ

15" 

2.0W 

+2.0W 

NOTE:

 All technical specifications are subject to change without notice.

Technical Information

768@60 

5.2 Signal connector pin assignment

Even the normal pixels on the LCD 

screen reach 99.99% or higher, there 

may be 0.01% or less pixels showing 

dark  or  light  while  displaying.

5.3 Visual Inspection

5.4 Troubleshooting

Before calling for service, check the information in this section to see if you

can remedy any problems by yourself. If you need assistance, please call the

dealer where you purchased the LCD monitor.

There is no SCREEN image

The power cord is securely connected to the monitor, the adaptor, and 

the wall outlet.

Check the signal cable connection between the monitor and the computer.

Adjust the brightness and contrast controls. 

Monitor in power saving mode.

Display image is too  large or too small

Use the OSD controls to adjust Auto Setup.

The colors are distorted

Signal cable properly connected.

Use OSD controls to adjust the color control setting.

The image is too light or too dark

Use OSD controls to adjust the brightness and contrast.

There is no sound or sound is low

Check the sound cable connection

Make sure the computer sound program is working

Adjust the volume on sound setting. Adjust your sound card or 

computer volume setting.

Adjust the volume control keys on the monitor

Warning Card

12

13

14