Full Text Searchable PDF User Manual
Digital Cable Receiver
N5366C-E
USER’S MANUAL
Manufactured By: SHENZHEN COSHIP ELECTRONICS CO., LTD.
IMPORTANT SAFETY INSTRUCTION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The MAINS plug is used as the disconnect device and shall remain readily operable.
Changes
or
modifications
not
expressly
approved
by
the
party
responsible
for compliance
could
void
the
user's
authority
to
operate
the
equipment
.
SPECIFICATION
Video Decoding
Product Standard
Video Resolution
480i, 576i
Product Standard
Is15245
Power Adapter
Physical Characteristics
Input Voltage
100-240V~ 50/60Hz
Size
115mm (L) × 115mm (W) × 28mm
(H)
Output Voltage
5V
Weight
158g
Output Current
1.0A
Operating
Temperature
0
℃
~ 40
℃
Local Power Supply
Storage
Temperature
-40
℃
~
+
60
℃
Input Voltage
5V
Storage Humidity
≤
93%
Input Current
1.0A
USB
Power Consumption 5W max.
USB Load
5VDC 300mAmax
REMOTE CONTROL UNIT
Receiver Keys
Name
Function
Switch between operation and standby modes
Mute/restore sound
0 ~ 9
Switch channels or input numbers
Back to previously viewed channel
INFO
Display channel information bar or detailed program information
MENU
Display/exit from main menu
EXIT
Back to
previous
menu
or
exit
from
operation
p
q
Switch
channels
or
move
cursor
up
/
down
t
u
Adjust
volume
or
move
cursor
left
/
right
OK
Display channel list or confirm operation
EPG
Display EPG
FAV
Display favorite channels window
Switch between TV and radio modes
Display mail information window
P+ (Red)
Page up, other functions depend on specific applications
P- (Green)
Page down, other functions depend on specific applications
AUDIO
Select audio language
REMINDER
Display schedule manage window
Yellow
Functions depend on specific applications
Blue
Functions depend on specific applications
PVR Keys
Name
Function
REC
Record current program or display recording information
STOP
Stop playback or recording
MEDIA
Display file list window
/
Fast backward/forward (x2, x4, x8, x16, x32 speed)
Start playback, pause/resume playing
Notes:
The keys on the top panel of the receiver have the same functions of those on the RCU.
Please operate according to the key instructions on screen.
INSTALLATION STEPS
Install digital TV SIM card
Digital TV SIM card is provided by your local operator for
watching programs of encrypted channels and accessing
digital TV services.
The SIM card slot is on the right side of the receiver.
Insert the card into the slot horizontally according to the
shape of the card in the following diagram.
Notes:
Only FTA channels are available without the card.
Please remember your card number in case of queries.
Do not bend or damage the card.
Do not place the card in hot environment or under
direct sunlight.
Please use dry and soft cloth to clean the surface of the
card gently. Do not put the card into liquid or cleaning
agent.
If the card does not work properly, please contact your
local operator.
SIM
Connect external remote control
signal receiver
There is a remote control signal receiver on the rear panel of
the receiver. If installation location of the receiver is not
convenient for your operation (e.g. behind TV), you can plug
the external signal receiver into IR port on the receiver to
receive signal.
Note:
Suggest you install the remote control signal receiver
in the central location along TV.
Remote Control
Signal Receiver
TV
0
47-862MHz
Connect signal
C
with an RF cable.
onnect CABLE IN port on the receiver to cable wall outlet
RF Cable
0
47-862MHz
Cable Wall Outlet
Connect USB device
Connect USB port on the right side of the receiver to USB
device with a USB cable.
Connect TV
Connect VIDEO/R-AUDIO/L-AUDIO ports on the receiver to
corresponding ports on TV with an AV cable.
Note:
Make sure your TV is set to AV input mode.
TV
VIDEO
R-AUDIO
L-AUDIO
AV Cable
0
47-862MHz
USB Cable
USB Device
Connect other equipment
Connect R-AUDIO/L-AUDIO ports on the receiver to
corresponding ports on audio equipment with an audio
cable.
If you need to loop output RF signal to another receiver,
please connect LOOP OUT port on the receiver to CABLE IN
port on another receiver with an RF cable.
Audio Cable
Audio Equipment
R-AUDIO
L-AUDIO
0
47-862MHz
Connect other equipment
Connect R-AUDIO/L-AUDIO ports on the receiver to
corresponding ports on audio equipment with an audio
cable.
If you need to loop output RF signal to another receiver,
please connect LOOP OUT port on the receiver to CABLE IN
port on another receiver with an RF cable.
CABLE IN
Another Receiver
RF Cable
Connect power
Plug
the
DC plug
of
power adapter into
power input port
on the receiver; plug the other end into a power outlet or
surge protector.
0
47-862MHz
MENU OPERATION GUIDE
Notes:
Please press
MENU
key to display main menu whenever you want to use menu system. In the main menu, select a sub-menu
and press
u
key to
enter.
The default system lock password is “0000”, the default maturity rating password is “1234”, which you should remember after
modification.
Shortcut keys are more useful when you watch programs, and their
meanings are indicated on remote control unit.
1. Installation
Auto Search:
You can search channels automatically without more operation.
Manual Search:
You can search channels by specifying frequency parameters
and search mode.
Upgrade Software:
Please follow instruction displayed on screen to perform
upgrade when you need it.
Notes:
If you are not sure about parameter values, you can search channels
according to defaults.
Do not turn off the receiver during searching and upgrading.
2. Manage Channel
Channel Edit:
You can lock channels. System lock password is required to
watch programs of these channels. In addition, you can move and delete
channels.
Favorite Channels:
You can set favorite channels, so that you can easily select
them in favorite channel list.
Channel Information:
You can view detailed information of current channel,
such as PIDs, signal level and quality, etc.
Schedule Manage:
All the scheduled programs are displayed in this window.
You can cancel or restore schedules.
3. User Setup
System Lock:
You can modify system lock password.
General Setting:
You can view and modify menu opacity, time zone, etc.
AV Setting:
You can view and modify TV mode, aspect mode, etc.
Language Setting:
You can view and modify menu language and audio
language.
Factory Default:
This function will restore system settings to factory default
and erase all channels. Please use this function carefully!
4. Information
CA Information:
You can view information about CA (Conditional Access) and
modify CA PIN and maturity rating. CA PIN is required to view programs
beyond the set rating.
MailBox:
You can view all the mails received from your local operator. In
addition, you can delete mails.
System Information:
You can view information of the receiver, such as
hardware version, software version, etc.
Customer Care:
You can view some information about your local operator.
5. PVR
File List:
You can playback and edit (sort, reverse, delete, delete all) recorded
files on USB device. In addition, you can rename files.
Schedule:
All the recording schedules are displayed in this window. You can
add, delete or edit schedules.
Note:
System will remind you near the airtime of the scheduled programs.
PVR Setting:
You can view and modify recording parameters, such as PVR icon
timeout and default recording duration.
HDD Format:
You can format USB device, and all files will be deleted.
Press
OK
key to display channel list in non-menu mode. You can browse
channels of different classes, such as TV ALL, Radio ALL, etc., and select a
channel to play in full screen.
EPG (Electronic Program Guide)
Press
EPG
key to display EPG in non-menu mode. You can browse program
information in a week and schedule to play future programs. The scheduled
programs will be displayed in schedule manage window.
CHANNEL LIST
Note:
System will remind you near the airtime of the scheduled programs.
CAUTION!
If you cannot solve the problem after referring to above trouble shooting, please contact your local operator. To reduce the
risk of electric shock, do not remove the cover. Equipment service and maintenance should be undertaken by trained
personnel.
TROUBLE SHOOTING
A. THE FRONT PANEL LIGHT IS OFF.
Make sure power adapter is attached to the unit and
plugged into a live power outlet securely.
-------------------------------------------------------------------------
B. NO PICTURE.
Make sure video cable is connected correctly.
-------------------------------------------------------------------------
C. NO SOUND.
Make sure audio cable is connected correctly.
Press
key to resume volume if the unit is in mute
mode.
Press
u
or
VOL+
key to turn up volume if volume is set to
minimum.
Press
AUDIO
key to select proper audio language.
-------------------------------------------------------------------------
D. NO SOUND AND NO PICTURE.
Make sure AV cable is connected correctly.
Make sure your TV is set to correct AV input mode.
Press
key to switch to operation mode if the unit is in
standby mode.
-------------------------------------------------------------------------
E. PICTURE AND SOUND MISMATCHED.
Press
AUDIO
key to select proper audio language.
-------------------------------------------------------------------------
F. NO SIGNAL.
Make sure signal cable is connected correctly.
Program parameters are set wrongly. Please correct
parameters.
-------------------------------------------------------------------------
G. PAUSE OR MOSAIC IMAGE.
Signal is too weak. Please connect signal cable securely.
-------------------------------------------------------------------------
H. PROGRAM CANNOT BE PLAYED.
SIM card is inserted incorrectly. Insert the SIM card
correctly.
SIM card cannot decrypt this kind of program.
You have not subscribed to the selected channel. Please
contact your local operator.
-------------------------------------------------------------------------
I. THE UNIT STOPS WORKING SUDDENLY.
Poor ventilation, or heat-producing object or device is
nearby. Put the unit in a cool and well-ventilated place.
-------------------------------------------------------------------------
J. REMOTE CONTROL FAILURE.
Make sure your remote control unit is aimed at the
remote control signal receiver.
If external remote control signal receiver is used, make
sure it is plugged into IR port on the receiver securely.
No enough power in batteries of remote control unit.
Please replace batteries.
-------------------------------------------------------------------------