Ourlife Kids Waterproof Camera with Video Recorder

Download PDF Manual:

Ourlife Kids Waterproof Camera with Video Recorder

Full Text of Manual:

USB port USB 2.0
Power supply External 3.7V rechargeable lithium battery
Menu language English/Simplified Chinese
Power Save 1 min./ 3 min.IS min./ OFF
Operating system
requirements WmdowsXPMsta/7 /8,Macl 0.8
User Manual
Appearane
1. Micro USB Port ;
2. Battery Power switch
3. Lens ;
4. Recording button;
5. Take photos button.

6. Page Up Button;
7. Power on/off Button;
8. Shutter Button;
9.Page Down Button;
IO.LCD;
11 .Busy indicator light(blue)
Charge indicator light(red);
12.Speaker
13.Microphone
14.Micro SD Card Slot.

Start to use
1. Charge the built-in lithium battery
The camera is equipped with external 3.7V lithium battery. Please ensure power
available for the camera and timely charge it in case of low battery.
Connect the camera to computer for charging under shutdown status.
The charging indicator light will be on when charging, and will be off
when the battery is fully charged. Generally, the battery can be fully charged
after about 3 hours.
4
2. How to use the memory card
2.1. Properly insert the TF card into the card holder as per the instructions indicated
near the card holder.
22. To remove the TF card, press the end of memory card gently, the card will be
ejected.
Nore: The camera is not equipped with built-in memory. Please insert memory
card before using.
5
l
3. Power on/off
Please switch the battery power switch to ” I” status before you turn on the e2men
3.1 Power on: Short-press the power Button e the screen will be on and the camera
will be started. -•
3.2. Power off: Hold on Power Button e for 3 seconds when the camera is in the idle
state to turn it off.
3.3. Auto screen off: The screen will be turned off automatically when the time that the
camera is in the idle state for automatic screen off to save power.
3.4. Power off when the camera is lack of electricity. When electrical capacity of the
battery is very low, an icon of CJ will be displayed on the LCD screen. prompting you
to charge it in time. When the icon flickers the camera will be turned off automatically.
Tips: Under long time not using camera and pro,tecting battery, please switch tbe
battery power button to”O” status
6
4. Recording mode ,photo mode,playback mode and system settings
4.1 Recording Mode
After power is on, the camera will enter video recording mode directly and in preview
mode .short-press Recording Button C;._i to start video recording; short-press it again
to stop shooting. Short-press page up b~Jon @ or page down button (e) to choice
color effect of images.there are seven kinds of color effects,such as normal,black
and white,retro,negative,red,green,blue.
4.2 Photo Mode
When you turn on your camera,you can short-press the take photos button@ to enter
photo mode, short-press it again to capture your photo. Then short-press page up button © or page down button {e) to select different frames.
4.3 Playback mode
In recording mode or photo mode,you can short-press the power on button ~ .The
LCD display will show as
follow:
7
You can short-press page up button@ and page down button 0 to change modes.
Then short-press shutter button e to confirm mode you choose .then short-press power
on button@ to exit it.
:Recording mode
:photo mode
II :playback mode
liJ :system settings
You view the captured videos and photos ip one of the following ways:
I.Please press button enter the Playback mode as above steps,then press down button to
select the video or photo as desired.
To playback a video,press shutter button to start, press shutter button again to pause
playing videos and press power on button to stop playing videos.In playback section,
press page up button or page down button to scroll the photos and videos.you can press
power on button to enter to the mode choice. i
8
2.Connect your camera to a computer using the supplied USB cable to view your captured
videos and photos.
4.4 System settings
You can enter to system settings as above steps,short-press page up button @ or page
down bunon . ~ to choice and short-press the shutter button 8 to confirm. then short-press
power on button to exit menu.
The functions as follows:
l.Resolurion :lM (1280X960), 3M C2048Xl536), 5M(2592Xl944)
2.Movie Size: HD(l280 X 720),640(640 X 480)
3.Power frequency: 50HZ ,60HZ
4.Power save:Select OFF/I min/3 min/5 min/Exit.To conserve battery power.the camera
will shut off if no key are pressed within the selected time
5.Date&Tmie:setting the date and time of the cameras
6-1.anguage: setting the language of the cameras
7.Invert Mode:you can set to change the image upside down
8.Format:Erase all data on the SD Card
9 .Reset All:Reset settings of the camera to factory default
5. Connect to PC
9
The camera has a plug-and-play function. Connect the power-on device to the computer
with the USB cable, and the mode can be automatically switched to the removable hard
disk. Removable disk icon will appear in the “My Computer” window. The pictures and
video files you shot stored in the removable disk H: \ DCIM\I00MEDIA folder (His
this equipment removable disk);
Note: During file downloading, it is prohibited to disconnect USB connection, and
plugging out the memory card when USB connected is also prohibited to avoid loss of data.
Technical parameters
Image sensor 1 . 3 mega-pixel CMOS image sensor
Function mode Recording, photo, playback
LCD screen 1. 77″ LCD Screen
Picture resolution lM ( 1280X 960,3 M ( 2048X 1536,SM (2592Xl944)
Video resolution HD(1280 X 720), 640(640X 480)
Storage medium TF card (Maximum supporting 32GB)
10