For anyone interested in the more technical side of LED under cabinet lighting here is a collection of detailed model and/or pricing information currently on the market and available for order from the following company:

CLEDLIGHT Semiconductor Lighting Co.,Ltd
ADD: 8F,Building 1,LangKou HuaMing Industrial Park, LangKou Community,DaLang Street,LongHua District, Shenzhen, China.
Tel: (86)-755-27709811
Fax: (86)-755-27709866
Website: www.cledlight.com

Data Sheet

C01 Extremely Thin Linear LED Light

LAMP

USE1

USE2

USE3

Plastic connector Connector cable Mounting Clip Led power supply DC receptacle

CLEDLIGHT’s C01 Linear-Led Light is widely used in showcases, display case or furniture. This extremely Thin Linear LED Light is especially applied to hidden/ covert installation. After processed by special optical system, which has patented, this kind of extremely thin linear light indeed becomes a continuous / real linear light source. By using connector cable and/or plastic connector, a few lamps can be installed in a row quickly and easily. The single Linear-LED Light comes in three different sizes (L=300mm/500mm/1000mm)

Benefits

• Energy saving up to 50% compared with traditional fluorescent under the same flux

• Life Span–over 50,000 hours

• Available in cool white, neutral white, and warm white color temperatures; Available in other colors

• Easy linking up to 36 watts per run

• Easy installation

• Low voltage, more safety.

Applications

LED show case lighting; LED shelf lighting; LED under counter lighting; LED display case lighting; LED retail product Lighting; LED Furniture Lighting; LED bookcase lighting; LED wardrobe lighting; LED wine cabinet lighting; LED under cabinet lighting; LED kitchen cabinet lighting; LED cove lighting; LED accent lighting; LED task lighting; LED product line lighting

Technical Operating Data

Product	length	Number of leds	Voltage	Power	Radiance	Color Temp.	Luminous Flux	Led Current
	[mm]	[pcs]	[V DC]	[W]	Angle [°]	[K]	[lm]*	[A]
C01L1	L=300	42	24	3	90	2700-6500k	280	0.18
C01L2	L=500	70	24	5	90	2700-6500k	460	0.18
CO1L3	L=1000	147	24	11	90	2700-6500k	920	0.18

Technical Features

Dimensions: 33mm (width) x 8mm (height) x “L”

Materials: Aluminum extrusion with black plastic end caps, Acrylic Lens Light Source: High brightness SMD3528 LED

Operating Temperature: -20°C to 40°C – Indoors Warranty: 2 years with proper installation and power supply

Installation: 2 Mounting Clips and 2 M2.6×10 screws make it easy to install

Packing Information:

Product	Color box* size	Carton size	Units/carton	Net weight	Gross weight
C01L1	450X36X12	475(length)X120(width)X235(height)	40	7.2	7.6
C01L2	650X36X12	675(length)X120(width)X235(height)	40	10.5	11.0
C01L3	1150X36X12	1175(length)X120(width)X235(height)	40	18.0	19.0
Power supply(6w)	76X61X46	250(length)X170(width)X270(height)	40	2.5	3.0
Power supply(12w)	136x58x77	315(length)X290(width)X340(height)	40	8.4	8.9
Power supply(24w)	136x58x77	315(length)X290(width)X340(height)	40	10.0	10.5
Power supply with DC receptacle(24w)	136x58x77	315(length)X290(width)X340(height)	40	11.0	11.5

Note: 1) Each Co1 color box includes 1lamp, 2 Mounting Clip, 2 M2.6×10 screws, 1 manual. (1 Plastic connector, 1 Connector cable is optional)

2) You can choose different power supply and accessories according to the power supply usage instruction,

Power supply usage instruction

Power Supply	C01L1	C01L2	C01L3
6W	2	1	XXX
12W	4	2	1
24W	8	4	2
36W	12	6	3

The following table shows how many lamps the power supply can drive respectively. You can select suitable power supply according to the power per run.

Note: 1) The power supply’s power should be over the total power when lamps are linked up.

Safety Information

1) Indoor use only

2)LED Module incorporates no protection against short circuits, overload or overheating. Therefore it is absolutely necessary to operate the modules with an electronically stabilised power supply offering protection against the above mentioned safety risks. Our power supply is specifically designed with protection features for safe operation. When using power supply other than us, the following basic safety features are required, in addition to any other application specific concerns and local safety codes:

Short circuit protection Overload protection Overheat protection

Packing Information:

Product	Color box* size	Carton size	Units/carton	Net weight	Gross weight
C01L1	450X36X12	475(length)X130(width)X238(height)	40	7.2	7.6
C01L2	650X36X12	675(length)X130(width)X238(height)	40	10.5	11.0
C01L3	1150X36X12	1175(length)X130(width)X238(height)	40	18.0	19.0
C11L1	450X36X12	475(length)X130(width)X238(height)	40	4.6	5.2
C11L2	650X36X12	675(length)X130(width)X238(height)	40	6.8	7.6
C11L3	1150X36X12	1175(length)X130(width)X238(height)	40	11.6	12.6
C09	100X100X23	675(length)X220(width)X233(height)	100	10	11

Drawing

Installation information:

Complete set connection guide:

?????????? ? 1 ? ? 1 ?

???????

CIE????:

????: x=0.3571 y=0.3571/u=0.2174 v=0.3261 (duv=-1.86e-003)

????: Tc=4588K ???:?d=578.0nm ???:Purity=14.3% ????: ?p=450nm ???:??p=21.7nm ??:R=14.3% G=82.5% B=3.1% ????: ?av=560nm

 

????:Ra=70.6
R1 =62 R2 =76	R3 =84	R4 =61	R5 =62	R6 =63	R7 =79	R8 =46
R9 =-53 R10=41	R11=51	R12=30	R13=65	R14=91	R15=58

???:

???:F=208.48(lm) ???:?=65.91(lm/W) ????? P=598.8(mW)

???:

U=24.00V I=0.1318A P=3.163W PF=1.000

????:
????:380.0nm-800.0nm ????:REF=17595	????:5.0nm ????:%=-0.011%	?????:Ip=12394(G=2,D=63) ???????:29.0?

????:CO1L1 ????: CLEDLIGHT

????:??PMS-50 ??????: CLEDLIGHT

????:27.9? ????:65.0%

????: ??? ????:2009-05-25 16:10

Data Sheet

C04 Trigonal Linear-LED Light

LAMP

USE1

USE2

Plastic connector Led power supply Mounting clip Connector cable

CLEDLIGHTL’s C04 Linear-Led Lighting is widely used in showcases, display case or furniture. This trigonal Linear-LED Lighting is especially applied for all kinds of square cabinets. It is installed in corner, making angle 45 degree focus on specified accent area. By using connector cable and/or plastic connector, a few lamps can be installed in a row quickly. The single Linear-LED Lighting comes in three different sizes.

Benefits:

• Energy saving up to 50% compared with traditional fluorescent under the same flux

• Life Span–over 50,000 hours

• Available in cool white neutral white and warm whit color temperatures; Available in other colors

• No harmful ultraviolet (UV) rays

• Easy linking up to 36 watts per run

• Easy installation

• Available in three different sizes (L=300mm/500mm/1000mm)

• Using low voltage, more safety

Applications:

LED show case lighting; LED shelf lighting; LED under counter lighting; LED display case lighting; LED retail product Lighting; LED Furniture Lighting; LED bookcase lighting; LED wardrobe lighting; LED wine cabinet lighting; LED under cabinet lighting; LED kitchen cabinet lighting; LED cove lighting; LED accent lighting; LED task lighting

Technical Operating Data:

Product	length	Number of leds	Voltage	Power	Radiance	Color Temp.	Luminous Flux	Led Current
	[mm]	[pcs]	[V DC]	[W]	Angle [°]	[K]	[lm]*	[A]
C04L1	L=300	42	24	3	90	2700-6500k	280	0.18
C04L2	L=500	70	24	5	90	2700-6500k	460	0.18
CO4L3	L=1000	147	24	11	90	2700-6500k	920	0.18

Technical Features:

Dimensions: 33mm (width) x 20mm (height) x “L”

Materials: Aluminum extrusion with black plastic end caps, Acrylic Lens Light Source: High brightness SMD3528 LED

Operating Temperature: -20°C to 40°C – Indoors Warranty: 2 years with proper installation and power supply

Installation: 2 Mounting Clips and 2 M2.6×10 screws make it easy to install

Package Contents:

Product	Color box* size(mm)	Carton size(mm)	Units/carton	Net weight	Gross weight
C04L1	450X34X23	470(length)X215(width)X215(height)	40	8.4	8.9
C04L2	650X34X23	670(length)X215(width)X215(height)	40	12.3	12.8
C04L3	1150X34X23	1170(length)X215(width)X215(height)	40	20.0	21.0
Power supply(6w)	76X61X46	250(length)X170(width)X270(height)	40	2.5	3.0
Power supply(12w)	136x58x77	315(length)X290(width)X340(height)	40	8.4	8.9
Power supply(24w)	136x58x77	315(length)X290(width)X340(height)	40	10.0	10.5

Note: 1) Each Co4 color box includes 1lamp, 2 Mounting Clip, 2 M2.6×10 screws, 1 manual. (1 Plastic connector, 1 Connector cable is optional)

2) You can choose different power supply and accessories according to the power supply usage instruction,

Power supply usage instruction

Power Supply	C04L1	C04L2	C04L3
6W	2	1	XXX
12W	4	2	1
24W	8	4	2
36W	12	6	3

The following table shows how many lamps the power supply can drive respectively. You can select suitable power supply according to the power per run.

Note: 1) The power supply’s power should be over the total power when lamps are linked up.

Safety Information

1. Indoor use only

   2)LED Module incorporates no protection against short circuits, overload or overheating. Therefore it is absolutely necessary to operate the modules with an electronically stabilised power supply offering protection against the above mentioned safety risks. Our power supply is specifically designed with protection features for safe operation. When using power supply other than us, the following basic safety features are required, in addition to any other application specific concerns and local safety codes:

   Short circuit protection Overload protection Overheat protection

   Drawing:

   

   Installation information:

   

   Complete set connection guide:

   

   

   

   Data Sheet

   

   Patented in: China, Europe, USA, Canada

   C10 Linear LED Light

   

   Model: C10

   

   C10A (C10 with ON/OFF switch) C10D (C10 with Built-in Touch dimmer)

   

   

   Size

   CLEDLIGHT’s C10 Cambered Linear LED Light is perfect for installation in showcases, display case or furniture. This Linear LED Light is especially applied to hidden/ covert installation. After processed by special optical system, this kind of flat linear light indeed becomes a continuous well-proportioned linear light source. With unique design, which has patented, the lamp can be easily to change the illuminated direction. The direction of LED light can be adjusted to 0°, 45°and 90°. With various accessories, the led light can have different extended functions like connection, motion and light sensor, dimmer and switch, etc.

   Advantages

   • Energy saving up to 50% compared with traditional fluorescent under the same flux

   • Life Span–over 50,000 hours

   • Available in cool white, neutral white, and warm white color temperatures;

   • Standard length: L1=300MM, L2=500MM and L3=1000MM, and customized length is also available.

     Standard finish color: white or silver, and customized color is also available.

   • Easy linking up to 48 watts per run and up to 3 meters when connected in series.

   • Easy installation with only 2 screws.

   • The direction of LED light can be adjusted for 0°,45°and 90 °.

   • Low voltage, more safety.

   • Warranty: 3 years.

   Applications

   LED show case lighting; LED shelf lighting; LED retail product Lighting; LED Furniture Lighting; LED bookcase lighting; LED wardrobe lighting; LED wine cabinet lighting; LED under cabinet lighting; LED kitchen cabinet lighting; LED cove lighting; LED accent lighting; LED task lighting; LED product line lighting

   

   Technical Operating Data

   Model No. length

   Number of leds

   Voltage Power Radiance Color Temp.

   CRI Luminous Flux

   [mm] [pcs] [Vdc] [W] Angle [°] [K] [lm]* C10L1 L=300 49 24 5 120 2700-6500k >80 400

   C10L2 L=500 77 24 8 120 2700-6500k >80 640

   C10L3 L=1000 154 24 16 120 2700-6500k >80 1280

   Dimensions: 33mm (width) x 9.5mm (height) x “L”

   Materials: Aluminum extrusion with plastic end caps, Acrylic Lens Light Source: High brightness SMD3014 LED

   Operating Temperature: -20°C to 40°C – Indoors Installation: 2 M3x10 screws make it easy to install

   Usage Instruction

   1. Standard package

      Standard package includes:

      1 piece of LED light, 1 piece of connecting cable, 1 piece of straight connector, 2pcs of screws

      C10/C10A/C10D LINEAR LED LAMP (1 piece) M3x10 screws

      

      

      

      C1001 STRAIGHT CONNECTOR (1 piece) AC01W CONNECTING CABLE

      

      LED light (1 piece) :

      C10: Basic model number, can connect with various accessories to get many extended functions. C10A: With built-in on-off switch. Switch function: master switch or individual switch to control itself C10D: With built-in touch dimmer. By touching this icon , it can not only be dimmable with the

      lamp gradually brighter or darker but also have on/off switch function.

      Screws (2PCS): M3.0X10

      Straight connector (1 piece): can be used for direct connection of LED fixtures.

      Connecting cable (1 piece): 1 meter long, can be used for long distance connection of LED fixtures.

   2. Basic Usage: The LED light needs to connect with power supply directly.

      The LED light needs to plug into power supply and then it can work, please refer to the picture as below.

      

   3. Using straight connector and connecting cable to connect the LED lights.

      Based on the above usage, using straight connector and connecting cable can make LED lights interconnection , please refer to the picture as below.

      

      

      

      Note:The maximum length for connection is not over than 3 meters.

   4. Adjust the direction of LED light

      

      The direction of LED light can be adjusted to 0°, 45°and 90°.

      Rotate LED light according to the symbol PULL printed on the end cap to 0°,45° and 90°. Attention that the LED light can only be rotated to 90°maximum.

      Installation of LED lights

      

      1. Pull up the blue adhesive tape.

      2. The adhesive tape will take mounting plate rotate to 90°.

      3. Rip the tape and fix the mounting plate with M3*10 screws onto the place where the LED light needs to be installed.

Power supply usage instruction

The following table shows how many lamps the power supply can drive respectively. You can select suitable power supply according to the power per run.

Power Supply	C10L1	C10L2	C10L3
6W	1	XXX	XXX
12W	2	1	XXX
24W	4	2	1
36W	7	4	2

Remarks:

1. The standard package of LED light doesn’t include power supply, but we can offer the power supply in separated package in different models for your choice.

2. The power of power supply must be over the total power of connected LED lights in series.

3. The voltage of constant-voltage power supply must be same as the voltage of LED lights. The output voltage of power supply can’t be allowed to be higher than the input voltage of LED light. If you choose to use other power supply, the power supply must have short circuit protection, overload protection, overheat protection besides the above requirements.

   Packing Information

   Product	Color box* size	Carton size	Units/ carton	Net weight [Kg]	Gross weight [Kg
   C10L1/C10AL1/C10DL1	450X36X12	470(length)X120(width)X230(height)	40	6.8	7.5
   C10L2/C10AL2/C10DL2	650X36X12	670(length)X120(width)X230(height)	40	11.2	12
   C10L3/C10AL3/C10DL3	1150X36X12	1170(length)X120(width)X230(height)	40	20.5	21.6
   Power supply(6w)	76X61X46	250(length)X170(width)X270(height)	40	2.5	3.0
   Power supply(12w)	136x58x77	315(length)X290(width)X340(height)	40	8.4	8.9
   Power supply(24w)	136x58x77	315(length)X290(width)X340(height)	40	10.0	10.5
   Power supply (36w)	136x58x77	315(length)X290(width)X340(height)	40	10.0	10.5

   C10 Extended accessories

   Except the standard accessories, we also can offer optional extended accessories of C10 system for your choice to get more various functions. For example: connection, sensor, dimmer and switch, etc.

   C1003 IN-LINE SWITCH

   

   C1004 IN-LINE TOUCH DIMMER C1005 DC JUNCTION BOX D01 WIRED DIMMER P01 PIR SENSOR

   

   P02 IN-LINE MOVING SENSOR

   

   AC02W 4/8 WAY SPLITTER

   Installation instructions of extended accessories

   1. In-line switch

      

      

      Installation Instruction: Use In-line switch to connect with LED lights, then connect the power supply to the input side of the In-line switch.

      Operation: Press the switch on the body to turn ON/OFF the system at any time and can control all the connected LED lights in a series.

   2. In-line Touch Dimmer: with dimmer and switch function

      

      

      Installation Instructions:

      1. Use In-line Touch Dimmer to plug into the DC jack socket and secure the Dimmer to the mounting surface.

      2. Connect the power supply to the input side of the Dimmer.

Operation:

1. Touch the power icon [] on the body to turn ON/OFF the system at any time.

2. The initial brightness is fixed at 100% when the system is first powered up.

3. When the light is on, the brightness can be adjusted by touching and holding the power icon for more than 0.5 seconds.

4. If the power to the dimmer is uninterrupted, the light level will be memorized when the system is turned off and then on again.

5. The dimmer switch can control all the connected LED lights in a series.

Note:This touch switch can’t control LED lights with built-in dimmer. If control the whole series in one line, please connect the LED lights without dimmer function.

3. DC Junction box

If use the power supply without DC plug or need to cut off the DC plug of power supply to connect LED light, you can choose to use DC junction box to connect the LED light with hardwired power supply.

Installation instructions:

1. Open the cover of DC junction box with screw driver.

2. Insert the positive and negative output side of power supply into the positive and negative terminal block and lock the screws of terminal block.

3. Close the cover by fastening the screws.

4. Plug the DC junction box into the DC jack socket and secure the DC junction box to the mounting surface.

5. Connect the power supply to the input side of the DC junction box.

Note:The LED light will not work if the positive & negative output side between power supply and terminal block is not consistent. It will not destroy LED light and you can make the correct positive &

negative connection between them.

4. Wired Dimmer: with dimmable and switch function

Installation Instructions:

1. Use the screws provided to secure the Dimmer to the mounting surface.

2. Connect the output to the LED light

3. Connect the power supply to the input side of the Dimmer.

4. This dimmer can be used in the place where the distance is less than 1 meter from the LED light

Operation:

1. Touch the power icon [] on the body to turn ON/OFF the system at any time.

2. The initial brightness is fixed at 100% when the system is first powered up.

3. When the light is on, the brightness can be adjusted by touching and holding the power icon for more than 0.5 seconds.

4. If the power to the dimmer is uninterrupted, the light level will be remembered when the system is turned off and then on again.

5. The dimmer switch can control all the connected LED lights in a series.

Note:This touch switch can’t control LED lights with built-in dimmer. If control the whole series in one line, please connect the LED lights without dimmer function.

1. Moving Sensor P02: With automatic sensor function.

   

   

   Installation Instructions:

   1. Use the sensor to plug into the DC jack socket and secure the Sensor to the mounting surface.

   2. Connect the power supply to the input side of the Sensor.

Basic Data:

Detection Distance: 3m Detection Range: 120°

Installation Angle: 0°, 45°, 90°

Delay time: Standard is 30 seconds and can be adjusted to 2 minutes (can design in 1s ~20 minutes as customers’ request)

Functional information:

1. Automatic detection: when people enter the detection area, infrared ray detector will output 12V or 24V and the light turns on.

2. Delay function: when people leave the detection area or people stay still, the light will turn off after 30 seconds. Delay time can be adjustable from 30 seconds to 3 minutes, or others.

3. Continuous detection: when people have activities during the period of delay time, the detector works and the light is always on.

4. Installation Angle: The sensor can be easily rotated and made 0 degrees or 45 degrees or 90 degrees with the mounting surface of light..

   

   

5. P02 PIR SENSOR is especially designed for CLEDLIGHT’s C10,C11 series LED light, use for other product maybe can’t work normally.

1. PIR Sensor P01: With automatic sensor function.

   

   

   Installation Instructions:

   1. Use the screws provided to secure the Sensor to the mounting surface.

   2. Connect the output to the LED light

   3. Connect the power supply to the input side of the Sensor.

   4. This dimmer can be used in the place where the distance is less than 1 meter from the LED light.

      Technical Features:

      Dimensions: ?48mm X 12mm Installation: Use 2 M3.0x10 screws

      Input/ Output voltage : DC12V or DC24V

      Related load wattage: Max 24W in 12V or 36W in 24V Detection Distance: 2m

      Detection Range: 120°

      Delay time: Standard is 30 seconds (can design in 1s ~20 minutes as customers’ request) Ambient light: <10 lux daylight .

      Drawing: Installation information:

      

      

      Functional information:

      1. Automatic detection: when people enter the active zone, infrared ray detector will output 12V or 24V and the light turns on.

      2. Delay function: when people leave the active zone or people stay still, the light will turn off after 30 seconds.

      3. Continuous detection: when people have activities during the period of delay time, the detector works and the light is always on.

      4. Light sensitive control: The PIR Motion Sensor has two sensitive parts, one is infrared ray sensitive part, and the other is light sensitive parts. So it works when people enter in the active zone in the daylight luminance is less than 10 lux.

2. AC02W 4/8 WAYSPLITTER.

You can use AC02W 4/8 WAYSPLITTER when one power supply needs to driver many pieces of LED LIGHTS.

For anyone interested in the more technical side of LED under cabinet lighting here is a collection of detailed model and/or pricing information currently on the market and available for order from the following:

MSD Lighting Co.,Ltd.
Website : www.meishida-led.com
Email: sales03@meishida-led.com
Tel No : +86-0755-2982 0442
Fax : +86-0755-2310 3629

LED Cabinet Light (MSD LIGHTING CO.LIMITED)‌‌
PIC	Item	Specification	Power	Length	Input Voltage	Lumens	Include accessories			Quotation
							Connector	Mounting Hardware	M3.0 Screws	The Q’ty<500	The Q’ty>500
	ET01L300	Extremely Thin Series Standard model	3W	300mm	12VDC	250lm	1	2	2	US$6.40	US$6.20
	ET01L500		5W	500mm	12VDC	450lm	1	2	2	US$7.88	US$7.60
	ET01L800		8W	800mm	12VDC	700lm	1	2	2	US$10.83	US$10.40
	ET01L1000		10W	1000mm	12VDC	800lm	1	2	2	US$12.32	US$11.80
	ET01L300P	Extremely Thin Linear Series Integrate with touch switch on the plastic end	3W	300mm	12VDC	250lm	1	2	2	US$7.42	US$7.15
	ET01L500P		5W	500mm	12VDC	450lm	1	2	2	US$8.90	US$8.57
	ET01L800P		8W	800mm	12VDC	700lm	1	2	2	US$11.77	US$11.28
	ET01L1000P		10W	1000mm	12VDC	800lm	1	2	2	US$13.33	US$12.77
	ET02L300	Corner lighting Linear Series Standard model	3W	300mm	12VDC	250lm	1	2	2	US$6.67	US$6.45
	ET02L500		5W	500mm	12VDC	450lm	1	2	2	US$8.15	US$7.85
	ET02L800		8W	800mm	12VDC	700lm	1	2	2	US$11.22	US$10.75
	ET02L1000		10W	1000mm	12VDC	800lm	1	2	2	US$12.70	US$12.15
	ET02L300P	Corner lighting Linear Series Integrate with touch switch on the plastic end	3W	300mm	12VDC	250lm	1	2	2	US$7.70	US$7.42
	ET02L500P		5W	500mm	12VDC	450lm	1	2	2	US$9.17	US$8.82
	ET02L800P		8W	800mm	12VDC	700lm	1	2	2	US$12.42	US$11.90
	ET02L1000P		10W	1000mm	12VDC	800lm	1	2	2	US$13.72	US$13.12
	ES20L300	Small Size Linear Series Standard model	3W	300mm	12VDC	250lm	1	/	2	US$6.22	US$6.02
	ES20L500		5W	500mm	12VDC	450lm	1	/	2	US$7.70	US$7.42
	ES20L800		8W	800mm	12VDC	700lm	1	/	2	US$10.65	US$10.23
	ES20L300P	Small Size Linear Series Integrate with touch switch on the plastic end	3W	300mm	12VDC	250lm	1	/	2	US$7.23	US$6.98
	ES20L500P		5W	500mm	12VDC	450lm	1	/	2	US$8.72	US$8.38
	ES20L800P		8W	800mm	12VDC	700lm	1	/	2	US$11.67	US$11.18
	ES27L300	Led cabinet lighting seris Standard model	3W	300mm	12VDC	250lm	1	/	2	US$8.25	US$7.95
	ES27L500		5W	500mm	12VDC	450lm	1	/	2	US$9.55	US$9.17
	ES27L1000		10W	1000mm	12VDC	800lm	1	/	2	US$13.62	US$13.03
	ES27L300IRS	Led cabinet lighting seris Integrate with IR sensor switch	3W	300mm	12VDC	250lm	1	/	2	US$8.80	US$8.47
	ES27L500IRS		5W	500mm	12VDC	450lm	1	/	2	US$10.10	US$9.70
	ES27L1000IRS		10W	1000mm	12VDC	800lm	1	/	2	US$14.17	US$13.57
	ES27L500PIR	Led cabinet lighting seris Integrate with PIR sensor	5W	500mm	12VDC	450lm	1	/	2	US$11.03	US$10.58
	ES27L1000PIR		10W	1000mm	12VDC	800lm	1	/	2	US$15.47	US$14.78
	ES26L300	Led cabinet lighting seris Standard model	3W	300mm	12V DC	290lm	1	2	2	US$6.77	US$6.55
	ES26L500		7W	500mm	12V DC	490lm	1	2	2	US$9.17	US$8.82
	ES26L300IRS	Led cabinet lighting seris Integrate with IR sensor	3W	300mm	12V DC	290lm	1	2	2	US$9.17	US$8.82
	ES26L500IRS		7W	500mm	12V DC	490lm	1	2	2	US$11.22	US$10.75
	ES16L600	IP66 Standard	4.3W	600mm	12V DC	350lm	1	/	2	US$8.98	US$8.65
	ES16L900		6.3W	900mm	12V DC	530lm	1	/	2	US$11.58	US$11.10
	ES16L1200		8.5W	1200mm	12V DC	700lm	1	/	2	US$13.98	US$13.38
	ES10L600	Standard	7W	600mm	12V DC	490lm	1	2	2	US$9.92	US$9.52
	ES10L900		10W	900mm	12V DC	800lm	1	2	2	US$12.88	US$12.33
	ES10L1200		13W	1200mm	12V DC	950lm	1	2	2	US$15.65	US$14.97
	ER13L600	IP66 Standard	5W	600mm	12V DC	450lm	1	2	2	US$8.98	US$8.65
	ED01	Standard model	2.8W	?70*9.5	12V DC	200lm	1	/	2	US$7.48	US$7.15
	ED01T	Integrate with touch switch	2.8W	?70*9.5	12V DC	200lm	1	/	2	US$8.41	US$8.01
	ED01TD	Touch switch and dimmable	2.8W	?70*9.5	12V DC	200lm	1	/	2	US$8.60	US$8.20
	ED01T is with Touch switch on the lamp body.
	ED01B	Standard model	1.8W	?68*7	12V DC	150lm	1	/	2	US$4.71	US$4.51
	ED01BT	Integrate with touch switch	1.8W	?68*7	12V DC	150lm	1	/	2	US$5.45	US$5.21
	ED01BT is with Touch switch on the lamp body.
	ED01C	1W LED	3W	?68*8	12V DC	270lm	1	/	2	US$6.10	US$5.80
	ED01D	Led recessed down lamp	1.8W	?65*11	12V DC	150lm	1	/	/	US$3.60	US$3.46
	ED02R	Standard model	1W	?60*7	12V	85lm	1	/	2	US$2.95	US$2.85
	ED02S	Standard model	1W	?60*7	12V	85lm	1	/	2	US$2.95	US$2.85
	EF05	Adjustable LED Spotlight	2W	H=60	12V DC	110lm	1	/	2	US$8.00	US$7.61
	EF06	Flexible Metal conduit LED Spotlight	2W	H=285	12V DC	110lm	1	/	2	US$9.03	US$8.58
	EF06A	Flexible Metal conduit LED Spotlight with switch	2W	H=285	12V DC	110lm	1	/	2	US$12.48	US$11.83
LED Lamp Accessores
	ECBOX8A	8 holes DC Receptacle. 1 hole is 5.5 DC connector; 8 holes are 3.5 DC connector								US$1.00	US$1.00

	ET01-SC	Straight Connector	Only suit for ET01 series	US$0.50	US$0.40
	ET01-CC	Right-angle Connector		US$0.50	US$0.40
	ET02-SC	Straight Connector	Only suit for ET02 series	US$0.50	US$0.40
	ET02-CC	Right-angle Connector		US$0.50	US$0.40
	ES20-SC	Straight Connector	Only suit for ES20 series	US$0.50	US$0.40
	ES20-CC	Right-angle Connector		US$0.50	US$0.40
	ES27-SC	Right-angle Connector	Only suit for ET27 series	US$0.50	US$0.40
	ED01DH	ED01D Base		US$0.40	US$0.30
	FC1-1M	Fexible Connector 1M Only suit for all Liear Led strip .one end DC3.5 male plug		US$0.40	US$0.30
	FC2-1M	Fexible Connector 1M Only suit for all Liear Led strip .doulbe end DC3.5 male plug		US$0.40	US$0.30
	ACE-1.5M	1.5M AC LED Driver Plug ( EU Plug )		US$0.60	US$0.50
LED Driver and controller
	EIR-01A	Monostable IR Sensor switch,Detect range 5cm , 12V/24VDC Input voltage, Max 2.5A input current.		US$4.20	US$3.90
	EIR-01B	Bistable IR Sensor switch, Detect range 5cm ,12V/24VDC Input voltage, Max 2.5A input current.		US$4.20	US$3.90
	DIM01	Dimmer is suitable for all of series 10-30V DC input,max 2A current		US$4.20	US$3.90
	EPD-01	External touch switch . Two model : touch switch/ touch dimmer switch . 10-30V DC input,max 2A current		US$4.20	US$3.90
	EPR-01	External PIR switch. 10-30V DC input,max 2A current		US$5.50	US$5.00
	ELT6-12VT	Super Slim Series H=10mm;6W 12VDC Led Driver with 3.5 DC connector hole;230VAC Input		US$3.80	US$3.60
	ELT15-12VT	Super Slim Series H=14mm;15W 12VDC Led Driver with 3.5 DC connector hole;230VAC Input		US$5.50	US$5.20
	ELT20-12VT	Super Slim Series H=14mm;20W 12VDC Led Driver with 3.5 DC connector hole;230VAC Input		US$6.50	US$6.20
	ELT30-12VT	Super Slim Series H=16mm;30W 12VDC Led Driver with 3.5 DC connector hole;230VAC Input		US$9.00	US$8.80

LED Aluminum Profile Application

1. MS-P1908

   Aluminum picture

   

   Application : This profile is embedded type most often used to install LED lights on the street or in areas where there is a risk of moisture ingress. It can be a space near the pool, in the intervals of terrace boards in paving tile, granite and ceramic plates, etc.

   

   

   The main difference from other types of profiles, it is massive and durable light diffusing screen, which is mounted with a special sealant . This profile is best protects the LEDs from moisture and mechanical damage.

   • Screen (transparent ,milk)

     

   • End caps (pair: one with a hole for the cable, the second – the deaf)

     

2. MS-P1506

   Aluminum picture

   

   

   This aluminum profile type applicator, although it can be used, including, as a mortise

   

   Its scope is limited only by your imagination.

   The profile can be activated to create decorative glowing bands in the walls, ceiling, floor, lights, work surfaces, shelves, steps, niches, front lighting glass or acrylic, etc.

   

   Our company this profile was first used, and is now frequently used for architectural lighting contour. His inner size is ideal for LED strip with protection degree IP-68.

   

   Screen (Transparent or milk)

   

   • End Caps (pair: one with a hole for the cable, the second – the deaf)

     

   • Fixing clips

     

3. MS-P2206

   Aluminum picture

   

   

   This aluminum profile flush mount

   Application : one of the most popular models profiles

   It is designed to tie-in furniture, shelves, drywall, wooden partitions, etc., as shown in the example

   

   The profile can be activated to create decorative luminescent bands in the walls, ceiling, floor, lights, work surfaces, shelves, steps, niches.

   

   • Screen (Transparent or milk)

     

   • Silencers (pair: one with a hole for the cable, the second – the deaf)

     

4. MS-P1612

   

   This aluminum profile can be as mortise and overhead

   LED profile MS-P1612 is virtually identical to the profile of the MS-P1506. The only difference – installation depth LEDs.

   When installed in this profile LED strip SMD 3528-120 using milk screen – you will achieve is a uniform line of light, without the effect of a point.

   

   

   • Screen (Transparent or milk)

     

     Plugs (pair: one with a hole for the cable, the second – the deaf)

     

     Plug (for transmitting power goes directly to the LEDs)

     

     fixling clips

     

5. MS-P2212

Deep mortise profile, allowing you to create bands of light with uniform illumination without points.

Embedded in this profile walls, ceiling, floor, furniture, you can create a stunning and unique interior design.

The interior and exterior, the product profile of MS-P2212 can perform as a decorative function, and the function of basic lighting.

Screen (transparent or milk)

Plugs (pair: one with a hole for the cable, the second – the deaf)

(6)MS-P1818

LP1818 – is a deep profile of a circular shape, which is most commonly used for the manufacture of linear LED fixtures on suspensions, stretching and stuff.

Fixtures of this profile are incredibly comfortable to illuminate paintings in galleries and exhibitions.

Profile P1818 is often used for the manufacture of the main lighting fixtures main offices and administrative offices.

A round profile often finds its application in furniture manufacturing, advertising and architecture.

Exclusive products from Profile

The interior and exterior, the product profile of LP1818 can perform as a decorative function, and the function of basic lighting.

Screen (transparent or milk)

Plugs (pair: one with a hole for the cable, the second – the deaf)

Plug jig (for transmitting power goes directly to the LEDs)

Fixing clips

(8)MS-P1919

Designed for mounting the LED light source at an angle of 45 degrees with respect to the mounting surface, which allows to effectively use light. Profile directs the light beam to the object illumination and prevents it in people’s eyes.

Steam is often used to illuminate the shopping marts, especially showcases jewelry stores, furniture for illumination, and sometimes, in the interior illumination.

MS-P1919 used for the production of lamps for the lighting of the gallery of paintings and other exhibits.

Screen (transparent or milk)

Plugs (pair: one with a hole for the cable, the second – the deaf)

fastening clips

(9)MS-P6628

This is a specialized profile designed to illuminate the steps in cinemas, nightclubs and many other sites

Wiring Diagram

Light diffusing screen and plugs

(9) MS-P7026

This profile can be considered a boon for the designer. It allows you to create a lighting directly inside the wall or other surface. The effect is simply stunning

Supplied 1, 2 or 3 meter complete with diffuser.

Available production fixtures, the parameters of the customer

Options:

Plugs (pair: one with a hole for the cable, the second – the deaf)

(10)MS-P4538

This profile type, mainly used for mounting in corners of rooms and create a beautiful contour lighting or main LED lighting.

light diffusing screen

1. MS-P3535

   

   This profile is used to create a decorative or general lighting. Supplied 2 or 3 meter complete with diffuser.

   Available production fixtures, the parameters of the customer. It may be light, like mortise and overhead, as well as suspended

   

   Light diffusing screen and plugs

   

2. MS-P3535B

   Aluminum Pictures

   

   This mortise profile used to create or deokrativnogo main lighting. Supplied louver 2 or 3 meter complete with diffuser.

   Available production fixtures, the parameters of the customer

   

   

   

   Light diffusing screen and plugs

   

   

3. MS-P2626

   Aluminum Pictures :

   

   

   Unique profile P2626 is ideal for mounting underground . There is no better solution to install lighting in the parking . It can be installed in a space near the pool , in the intervals of terrace boards in paving tiles , granite and ceramic plates , etc.

   The main difference between the profile of P1908, from other types of profiles , it is massive and durable light diffusing screen, which is mounted with a special sealant ( sealant name , we strongly recommend to learn from employees MSD Light). This profile is best protects the LEDs from moisture and mechanical damage.

   

   

   

   

   

   –PC Cover : Milk

   

   –End Caps :

4. MS-P3006

   Aluminum pictures

   

   Profile P3006 Surface-profile type. Used for all sorts of highlights, but mainly for the conditional separation zones or interior spaces.

   Can be mounted on shelves, furniture, walls, floors, etc.

   

   PC Cover : transparent ,diffuse ,milk optional

   

   End Caps (pair: one with a hole for the cable, the second – the deaf)

   

5. MS-P3010

   

   Aluminum Pictures

   Profile angled mounting P3010, is mainly used to illuminate the facade windows. Installation of lighting using proflya PML-180 is very simple and requires no special

   skills

   

   PC Cover : transparent ,diffuse ,milk optional

   

   End Caps (pair: one with a hole for the cable, the second – the deaf)

   

6. MS-P6009

   Aluminum Pictures

   

   

   Three-tier profile Recessed used to create intense lighting or general lighting. Scope furniture manufacturing, interior and exterior lighting and lighting production, advertising and much more.

   

   Options:

   • Screen (Transparent or milk)

   

   –End Caps (pair: one with a hole for the cable, the second – the deaf)

   

7. MS-P5609

Aluminum Pictures

Three-tier profile Recessed used to create intense lighting or general lighting. Scope – furniture manufacturing, interior and exterior lighting and lighting production, advertising and much more.

Options:

–PC Cover : Transparent ,Diffuse or Milk Optional

–End Caps (pair: one with a hole for the cable, the second – the deaf)